Lincoln E1GZ-1104-B Hub Assembly - Wheel

You can Select Your Vehicle to check if E1GZ-1104-B fits your vehicle.

Begin removal by loosening rear wheel lug nuts, raising the vehicle, and securing it on jack stands. Remove the wheel, brake caliper (keeping the brake line attached), brake disc, brake hose bracket, and, for all-wheel drive models, the driveaxle/hub nut(s) and wheel speed sensor.

It is recommended to leave this job to a professional mechanic who has the necessary tools and expertise. Alternatively, the assembly can be taken to an automotive machine shop or qualified repair facility equipped with the required tools.

To install the hub and bearing assembly, follow the reverse steps of removal. Additionally, make sure to replace all suspension fasteners that were removed with new ones and tighten them to the specified values listed in the Specifications.

For 2011 and later models, install the wheel hub/bearing assembly onto the rear knuckle, guiding the drive axle into the splines for all-wheel drive models. Tighten the hub assembly-to-rear knuckle bolts to the specified torque. The remainder of the installation is the reverse of the removal process. Tighten brake fasteners, and for all-wheel-drive models, tighten the drive axle/hub nut(s). Install the wheel and lug nuts, lower the vehicle, and torque the lug nuts.