Lincoln 7L1Z-6068-AC Engine Support Insulator Assembly

You can Select Your Vehicle to check if 7L1Z-6068-AC fits your vehicle.

Attach an engine support fixture to the engine lifting eyes adjacent to the exhaust manifolds. Note that many equipment rental yards rent the engine support fixture.

Disconnect the cable from the negative battery terminal.

Installation is the reverse of the removal procedure. Be sure to tighten the nuts and bolts securely.

Engine mounts seldom require attention, but broken or deteriorated mounts should be replaced immediately to prevent added strain on the driveline components, which may cause damage or wear.

Engine mounts seldom require attention, but broken or deteriorated mounts should be replaced immediately to prevent damage or wear to driveline components.

Insert a large screwdriver or pry bar into the space between the transmission and the crossmember and try to pry the transmission up slightly. You can also insert a pry bar or large screwdriver and try to lever the transmission up and down. If the transmission is easily moved, look closely at the rubber insulator part of the mount; it's probably torn or cracked and must be replaced. The transmission should not move away from the insulator much. If there is any separation of the rubber, the mount is worn out.