Lincoln 2L1Z-2140-DA Kit - Master Cylinder Repair

You can Select Your Vehicle to check if 2L1Z-2140-DA fits your vehicle.

Loosen the tube nuts at the ends of the brake lines where they enter the master cylinder, using a flare-nut wrench to avoid rounding off the nuts. Pull the brake lines slightly away from the master cylinder and plug the ends. Remove the two master cylinder mounting nuts, turn the master cylinder on its side, and unplug the electrical connector for the low fluid level warning switch. Remove the master cylinder and discard any remaining fluid in the reservoir.

If the master cylinder is removed, the entire hydraulic system must be bled, and bench bleeding before installation can reduce bleeding time.