Lincoln 5L1Z-7A095-CA Oil Cooler Assembly

You can Select Your Vehicle to check if 5L1Z-7A095-CA fits your vehicle.

To replace the oil cooler, you need to disconnect the oil and coolant hoses from the cooler. On 2WD models, you use a 1/2-inch Allen wrench to remove the oil cooler housing from the oil filter adapter housing. On 4WD models, you remove a single bolt retaining the cooler to its bracket and two bolts holding the oil line assembly on the cooler. Then, you can pull the oil cooler from the adapter on the block.

The engine oil cooler is mounted at the lower left side of the engine block and is connected to the remote oil filter. It helps cool the engine oil by allowing coolant to flow through it.