Lincoln HU2Z-11V002-CBRM Starter Motor Assembly

You can Select Your Vehicle to check if HU2Z-11V002-CBRM fits your vehicle.

Yes, on 3.7L V6 models with automatic transmissions, you should remove the automatic transmission cooler line bracket mounting nut and move the bracket back, out of the way.

Do not immediately assume that the starter is causing the problem. First, check the following items: a) Ensure that the battery cable clamps are clean and tight at the battery terminals. b) Inspect the condition of the battery cables and replace any defective ones with new ones. c) Test the condition of the battery; if it does not pass all tests, replace it with a new battery. d) Inspect the condition of the starter solenoid wiring and connections. e) Ensure that the starter mounting bolts are tight. f) Check that the starter is receiving voltage on the S terminal of the starter solenoid when the ignition key is turned to Start. g) Verify the operation of the Digital Transmission Range (DTR) sensor or clutch start switch, ensuring the shift lever is in PARK or NEUTRAL (automatic) or the clutch pedal is pressed (manual). h) Check the operation of the starter relay located in the fuse and relay box behind the right kick panel inside the vehicle.

THIS IS A REMANED PART