Make sure this part fits

Lincoln 2L1Z-3219-AA Shaft - Front Axle

2002-2006 Lincoln 2L1Z3219AA

Customer Questions & Expert Answers (16)
Ford 2L1Z-3219-AA Shaft - Front Axle
  • Part Description
    Shaft - Front Axle
  • Position
    Passenger Side
  • Replaced By
    6L3Z-3219-A
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Lincoln
    Manufacturer Part Number2L1Z-3219-AA, 2L1Z3219AA
    Part DescriptionShaft - Front Axle
    Manufacturer NoteRH, 3.73 ratio
    Item Dimensions33.0 x 6.7 x 7.3 inches
    Item Weight18.30 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKU2L1Z-3219-AA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2006 Lincoln Mark LT6 Cyl 4.2L OHV EFI, 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 4.6L Windsor SOHC EFI, 8 Cyl 5.4L4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R70E W/TSS, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 5-Speed Manual Transmission - Mazda M5R2-C, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
    2002-2003 Lincoln Navigator8 Cyl 5.4L, 8 Cyl 5.4L DOHC EFI4AT 4R100, 4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
  • Customer Questions & Expert Answers

    Q:
    I am wondering if this is the exact part that fits in Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 2L1Z-3219-AA fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What type of joints do the driveaxles in the front axle assembly have for the 2007 Lincoln Navigator? Posted by Customer
    A:
    The driveaxles in the front axle assembly have inner and outer constant velocity (CV) joints.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step for front driveaxle removal on the 2004 Lincoln Navigator? Posted by Customer
    A:
    For 2005 and later models, start by removing the hub dust cap and driveaxle nut.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What's the next step after removing the pinion shaft lock bolt for the 2005 Lincoln Navigator? Posted by Customer
    A:
    After removing the lock bolt, you rotate the differential case 180-degrees and slide the pinion shaft out of the case until the stepped part of the shaft contacts the ring gear.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you disconnect from the axleshaft flanges for the 2000 Lincoln Navigator? Posted by Customer
    A:
    Disconnect the front driveaxles.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What's the first task after removing the rear wheels for the 1999 Lincoln Navigator? Posted by Customer
    A:
    After removing the rear wheels, you should disconnect the driveshaft from the rear axle differential pinion flange.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What bolts should you remove after removing the front carrier bushing bolts for the 1999 Ford Expedition? Posted by Customer
    A:
    Remove the four front differential support bolts.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the purpose of an optional locking limited-slip rear axle for the 1998 Ford Expedition? Posted by Customer
    A:
    The optional locking limited-slip rear axle enhances traction by equalizing wheel rotational speeds when one loses traction.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the axleshaft from the rear axle housing for the 1997 Ford Expedition? Posted by Customer
    A:
    To remove the axleshaft, you push the outer (flanged) end of the axleshaft in and remove the C-lock from the inner end of the shaft. Then, you withdraw the axleshaft, being careful not to damage the oil seal in the end of the axle housing as the splined end of the axleshaft passes through it.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after securing the 1998 Ford Expedition on jackstands and blocking the front wheels? Posted by Customer
    A:
    After securing the vehicle, the next step is to remove the rear wheels.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should you perform the installation of the front driveaxle on the 2004 Ford Expedition? Posted by Customer
    A:
    For installation, follow the reverse order of removal, ensuring proper tightening of the driveaxle hub nut and CV joint flange bolts. Use a new cotter pin and reactivate the air suspension system if applicable.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What type of rear axle assembly is described in this section for the 2006 Ford F-150? Posted by Customer
    A:
    The described rear axle assembly is a hypoid, semi-floating type.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the final step in removing the rear axle assembly for the 2012 Ford F-150? Posted by Customer
    A:
    Lower the axle assembly and remove it from under the vehicle.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What components should be separated from the steering knuckle for the 2010 Ford F-150? Posted by Customer
    A:
    Separate the upper control arm and tie-rod end from the steering knuckle.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What needs to be removed after raising the rear of the 2011 Ford F-150 and supporting it securely on jackstands? Posted by Customer
    A:
    The wheel and brake disc.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What needs to be disconnected after removing the front skid plate for the 2011 Ford F-150? Posted by Customer
    A:
    After removing the front skid plate, the front driveshaft needs to be disconnected.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 2L1Z-3219-AA, the Right Choice

To ensure reliability, purchase Ford part # 2L1Z-3219-AA Shaft - Front Axle. It is sometimes referred to as Lincoln Axle Shaft. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Lincoln Mark LT, Navigator models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford 2L1Z3219AA Shaft - Front Axle. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Lincoln parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly