Make sure this part fits

Lincoln 4L1Z-3220-AA Shaft - Front Axle

2004-2006 Lincoln 4L1Z3220AA

Customer Questions & Expert Answers (16)
Ford 4L1Z-3220-AA Shaft - Front Axle
  • Part Description
    Shaft - Front Axle
  • Base No.
    3220
  • Position
    Driver Side
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Lincoln
    Base No.3220
    Manufacturer Part Number4L1Z-3220-AA, 4L1Z3220AA
    Part DescriptionShaft - Front Axle
    Other NamesAxle Assembly, Axle Shaft, Drive Axle
    Item Dimensions30.1 x 5.2 x 5.7 inches
    Item Weight7.10 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKU4L1Z-3220-AA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2006 Lincoln Mark LT6 Cyl 4.2L OHV EFI, 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 4.6L Windsor SOHC EFI, 8 Cyl 5.4L4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R70E W/TSS, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 5-Speed Manual Transmission - Mazda M5R2-C, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
    2004-2006 Lincoln Navigator8 Cyl 5.4L, 8 Cyl 5.4L DOHC EFI4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
  • Customer Questions & Expert Answers

    Q:
    Is the the correct part for the attached VIN? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4L1Z-3220-AA fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What is the final step for front driveaxle removal on the 1999 Ford Expedition? Posted by Customer
    A:
    To complete the front driveaxle removal, remove the steering knuckle, and then remove the driveaxle assembly.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after securing the 1998 Ford Expedition on jackstands and blocking the front wheels? Posted by Customer
    A:
    After securing the vehicle, the next step is to remove the rear wheel and brake drum or disc.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the significance of the centerline of the pinion gear being below the centerline of the ring gear for the 2008 Ford F-150? Posted by Customer
    A:
    This configuration allows the outer rear tire to turn more quickly than the inner tire when the vehicle goes around a corner.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What additional steps are required for the 2000 Ford Expedition? Posted by Customer
    A:
    For these models, additional steps include removing the rear driveshaft and driveaxles, spare tire, differential vent hose, and vehicle speed sensor connector.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done before raising the rear of the 2010 Ford F-150? Posted by Customer
    A:
    The front wheels should be blocked.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How are the axleshafts connected to the differential side gears for the 2000 Ford Expedition? Posted by Customer
    A:
    The axleshafts are splined to the differential side gears.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you disconnect from the front axle tube for the 2001 Ford Expedition? Posted by Customer
    A:
    Disconnect the vent hose.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    Why is it recommended to support the outer end of the driveaxle with a piece of wire for the 2012 Ford F-150? Posted by Customer
    A:
    This is to avoid unnecessary strain on the inner CV joint.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What bolts need to be removed before lowering the axle assembly for the 2007 Ford F-150? Posted by Customer
    A:
    Before lowering the axle assembly, the upper, lower, and axle tube mounting bolts need to be removed.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step in the procedure for the 2007 Ford F-150? Posted by Customer
    A:
    The first step is to raise the rear of the vehicle and support it with jackstands placed under the frame rails.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do for installation for the 1998 Lincoln Navigator? Posted by Customer
    A:
    Follow the reverse of the removal process.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should you lift the rear of the 2008 Lincoln Navigator securely for this procedure? Posted by Customer
    A:
    Lift the rear of the vehicle securely with jackstands under the frame.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What's the first step in the installation process for the 1998 Lincoln Navigator? Posted by Customer
    A:
    The first step in the installation process is to reverse the removal steps, starting with inserting the axleshaft.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What are the initial steps for front driveaxle removal on the 1998 Lincoln Navigator? Posted by Customer
    A:
    Begin by turning off the air suspension system if equipped and loosening the wheel lug nuts.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What type of rear axle assembly is found in the 2002 Lincoln Navigator? Posted by Customer
    A:
    The rear axle assembly in most models is a hypoid, semi-floating type.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 4L1Z-3220-AA, the Right Choice

Your vehicle deserves only genuine OEM Ford parts and accessories. To ensure reliability, purchase Ford part # 4L1Z-3220-AA Shaft - Front Axle with base parts number 3220. It is sometimes referred to as Lincoln Axle Shaft. Our Ford parts and accessories are expedited directly from authorized Ford dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM Ford parts are the best for restoring your vehicle to factory condition performance. This part fits specific Lincoln Mark LT, Navigator models.

Affordable, reliable and built to last, Ford part # 4L1Z3220AA Shaft - Front Axle stands out as the smart option. FordPartsGiant.com is your prime online source with the biggest and best selection of genuine Ford parts and accessories at giant discounted prices. We have the OEM Ford parts and accessories you need at the wholesale prices. FordPartsGiant.com has you covered no matter what type of Ford vehicle you drive. For detailed Lincoln parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly