Make sure this part fits

Lincoln 6L1Z-3219-AA Shaft - Front Axle

2004-2006 Lincoln 6L1Z3219AA

Customer Questions & Expert Answers (16)
Ford 6L1Z-3219-AA Shaft - Front Axle
  • Part Description
    Shaft - Front Axle
  • Base No.
    3219
  • Position
    Passenger Side
  • Replaces
    4L1Z-3219-AA
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Lincoln
    Base No.3219
    Manufacturer Part Number6L1Z-3219-AA, 6L1Z3219AA
    Part DescriptionShaft - Front Axle
    Other NamesAxle Assembly, Axle Shaft, Drive Axle
    Item Dimensions30.1 x 5.2 x 5.7 inches
    Item Weight19.40 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces4L1Z-3219-AA
    ManufacturerFord
    SKU6L1Z-3219-AA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2006 Lincoln Mark LT6 Cyl 4.2L OHV EFI, 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 4.6L Windsor SOHC EFI, 8 Cyl 5.4L4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R70E W/TSS, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 5-Speed Manual Transmission - Mazda M5R2-C, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
    2004-2006 Lincoln Navigator8 Cyl 5.4L, 8 Cyl 5.4L DOHC EFI4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
  • Customer Questions & Expert Answers

    Q:
    Can you tell me if this part is correct for my car? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 6L1Z-3219-AA fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How should you secure the 2000 Ford Expedition before lifting it for front driveaxle removal? Posted by Customer
    A:
    Secure the vehicle with jackstands and then raise the vehicle. Remove the front wheel.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after turning off the air suspension system for the 2004 Lincoln Navigator? Posted by Customer
    A:
    Loosen the wheel lug nuts.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    Who should typically perform the overhaul of the differential for the 2007 Lincoln Navigator? Posted by Customer
    A:
    Overhauling the differential typically requires special tools and is best left to professionals.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    Are there any specific recommendations for the pinion shaft lock bolt during installation for the 2002 Lincoln Navigator? Posted by Customer
    A:
    The manufacturer recommends using a new pinion shaft lock bolt for installation. However, if one is not available, you should coat the threads with a non-hardening thread locking compound.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What other components should be disconnected in this section for the 1998 Lincoln Navigator? Posted by Customer
    A:
    In addition to the driveshaft, you should disconnect the parking brake cables, remove the brake assemblies and backing plates, and unplug the electrical connector from the rear ABS sensor.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step for front driveaxle removal on the 2008 Lincoln Navigator? Posted by Customer
    A:
    For 2005 and later models, start by removing the hub dust cap and driveaxle nut.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What type of rear axle assembly is found in the 2002 Ford Expedition? Posted by Customer
    A:
    The rear axle assembly in most models is a hypoid, semi-floating type.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you ensure when installing for the 2000 Ford Expedition? Posted by Customer
    A:
    Ensure to tighten all fasteners securely.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you prevent the differential case from turning during pinion shaft removal for the 1997 Ford Expedition? Posted by Customer
    A:
    To prevent the differential case from turning when removing the pinion shaft lock bolt, position a large screwdriver between the rear axle case and a ring gear bolt.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after these additional steps are completed for the 2000 Ford Expedition? Posted by Customer
    A:
    After completing the additional steps, support the differential with a floor jack, remove the differential's nuts and front torque arm bolt, and move it forward to clear the studs before carefully lowering it.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after removing the wheel for the 2005 Ford F-150? Posted by Customer
    A:
    After removing the wheel, you should remove the dust cap from the hub/wheel bearing.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the significance of the centerline of the pinion gear being below the centerline of the ring gear for the 2004 Ford F-150? Posted by Customer
    A:
    This configuration allows the outer rear tire to turn more quickly than the inner tire when the vehicle goes around a corner.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How can the differential case be prevented from turning when removing the pinion shaft lock bolt for the 2005 Ford F-150? Posted by Customer
    A:
    A large screwdriver should be positioned between the rear axle case and a ring gear bolt.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What needs to be removed after blocking the rear wheels for the 2012 Ford F-150? Posted by Customer
    A:
    After blocking the rear wheels, the front wheels need to be removed.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done with the rear brake calipers after removal for the 2008 Ford F-150? Posted by Customer
    A:
    Tie the rear brake calipers up with wire to keep any strain off the brake lines.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 6L1Z-3219-AA, the Right Choice

To ensure reliability, purchase Ford part # 6L1Z-3219-AA Shaft - Front Axle. It is sometimes referred to as Lincoln Axle Shaft. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Lincoln Mark LT, Navigator models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford 6L1Z3219AA Shaft - Front Axle. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Lincoln parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly