Lincoln 8L1Z-5A891-A Spring

You can Select Your Vehicle to check if 8L1Z-5A891-A fits your vehicle.

The bottom of the spring should be installed in the lower control arm.

In vehicles with four-wheel air suspension, you should disconnect the upper end of the front height sensor, push in the red ring on the shock body, hold it there, and pull out the air line.

Yes, there are step-by-step instructions provided for the removal and installation of these components.

Additional steps include loosening the front wheel lug nuts, raising the vehicle, removing the wheels, detaching various components like the tie-rod end, upper ball joint, and fasteners attaching the lower end of the shock absorber to the lower control arm. Finally, remove the shock absorber/coil spring assembly for inspection and replacement as needed. Installation follows the reverse of the removal process, ensuring proper tightening of fasteners and lug nuts.

The instructions cover actions such as loosening wheel lugnuts, raising and supporting the vehicle, removing and installing various nuts, bolts, and components. It also mentions using new fasteners where necessary.

There are two drain holes in the spring seal in the lower control arm.