Mercury F7AZ-19C836-AA Accumulator Assy - Air Conditioning

You can Select Your Vehicle to check if F7AZ-19C836-AA fits your vehicle.

To remove the receiver-drier or accumulator, you need to have the system discharged by a dealer service department or an automotive air conditioning repair facility. Then, disconnect the cable at the negative battery terminal and disconnect the refrigerant inlet and outlet lines. Cap or plug the open lines immediately. Finally, remove the mounting bolt(s) and slide the receiver-drier assembly up and out of the mounting bracket.

Drain the refrigerant oil from the old accumulator/drier and add the same amount plus two ounces of clean refrigerant oil to the new accumulator.

Connect the cable to the negative terminal of the battery and have the system evacuated, recharged, and leak tested by a dealer service department or an air conditioning repair facility.