Make sure this part fits

Mercury 6W1Z-3079-AA Arm Assembly - Front Suspension

2004-2006 Mercury Grand Marquis 6W1Z3079AA

Customer Questions & Expert Answers (5)
Ford 6W1Z-3079-AA Arm Assembly - Front Suspension
  • Part Description
    Arm Assy - Front Suspension
  • Base No.
    3078
  • Position
    Driver Side
  • Replaces
    5W1Z-3079-AA
  • Manufacturer
    Ford
Make sure this part fits
$539.33 MSRP: $749.22
You Save: $209.89 (29%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mercury
    Base No.3078
    Manufacturer Part Number6W1Z-3079-AA, 6W1Z3079AA
    Part DescriptionArm Assy - Front Suspension
    Other NamesLower Control Arm
    Manufacturer NoteL.H., standard suspension, without special packages, FROM 08/03/05 TO 12/05/05
    Item Dimensions5.1 x 18.9 x 22.1 inches
    Item Weight21.80 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces5W1Z-3079-AA
    ManufacturerFord
    SKU6W1Z-3079-AA
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2004-2006 Mercury Grand Marquis8 Cyl 4.6L4AT 4R70W
  • Customer Questions & Expert Answers

    Q:
    Can you tell me if this part is correct for my car? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 6W1Z-3079-AA fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What is the process for removing the upper control arm on the 1989 Mercury Grand Marquis? Posted by Customer
    A:
    Position a floor jack under the lower control arm. Remove the pinch bolt and nut retaining the upper balljoint stud to the steering knuckle. Use a prybar to spread the slot in the knuckle and separate the balljoint stud. Remove the upper control arm retaining bolts and the upper control arm assembly.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What are the steps involved in removing the balljoint stud and lowering the control arm for the 2011 Mercury Grand Marquis? Posted by Customer
    A:
    Remove the cotter pin from the balljoint stud. Loosen the castle nut on the stud. Use sharp raps on the steering knuckle near the stud to release pressure and loosen the stud. Remove the balljoint stud nut. Lower the control arm by removing its mounting bolts.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What are the steps involved in the installation of the lower control arm for the 1992 Ford Crown Victoria? Posted by Customer
    A:
    Secure the lower control arm with mounting bolts (not fully tightened initially). Use a spring compressor for 2002 and earlier models and properly seat the spring. Insert the balljoint stud into the steering knuckle. Tighten the castle nut and install a new cotter pin. On 2003 and later models, install the shock absorber/coil spring assembly. For 1988 through 1991 models, attach the stabilizer bar.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the process for removing the upper control arm on the 1994 Ford Crown Victoria? Posted by Customer
    A:
    Remove the cotter pin from the upper balljoint stud and loosen the stud nut slightly. Place a floor jack under the lower control arm and raise it slightly. Tap the steering knuckle near the upper balljoint stud with a hammer to loosen it. Use a balljoint stud separator if needed (note that this may damage the balljoint boot). Remove the nut from the upper balljoint stud and the upper control arm pivot shaft attaching bolts. Remove the upper control arm and pivot shaft as an assembly.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 6W1Z-3079-AA, the Right Choice

To ensure reliability, purchase Ford part # 6W1Z-3079-AA Arm Assembly - Front Suspension. It is sometimes referred to as Mercury Control Arm. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Mercury Grand Marquis models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford 6W1Z3079AA Arm Assembly - Front Suspension. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Mercury parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly