Mercury 5L8Z-3A331-BA Boot

You can Select Your Vehicle to check if 5L8Z-3A331-BA fits your vehicle.

Models equipped with ABS feature ABS sensor rings on the outer CV Joints. Inspection for chipped or missing teeth on these rings is essential. If necessary, the sensor ring should be replaced.

To assess the steering system components, start by gently rocking the steering wheel back and forth to detect excessive freeplay. Excessive freeplay could indicate issues with front wheel bearings, steering shaft universal joint, lower arm ball joint, or steering gear. Additionally, look for symptoms like body movement over rough roads, swaying around corners, and binding during steering wheel turns, which may suggest problems with steering and suspension components.

You can evaluate shock absorbers by pushing down and releasing the vehicle at each corner. Observe whether the vehicle returns to a level position within one or two bounces and listen for any squeaks. Inspect the shocks for fluid leakage and ensure they are securely mounted and undamaged.

Yes, the same procedure applies to 4WD models for both the Inner and outer CV joint boots. The steps for inspection, cleaning, and reassembly are similar for both inner and outer CV joints in 4WD models.