Mercury YW7Z-2A635-AB Cable Assy - Parking Brake

You can Select Your Vehicle to check if YW7Z-2A635-AB fits your vehicle.

Replacing the front cable on 1990 and later models is challenging due to its connection to the parking brake mechanism under the dash, making it necessary to fabricate a special tool for disconnection. It is recommended to have a professional with the right tools and expertise replace it if needed.

To replace the front cable on 1988 and 1989 models, raise the vehicle and support it on jackstands. Release the parking brake, loosen the adjusting nut at the adjuster, disconnect the cable from the adjuster bracket, remove the clip retaining the cable to the body, disconnect the cable from the pedal assembly inside the vehicle, and finally, remove the cable down through the floorpan.