Mercury 3W1Z-2A815-AA Cable Assembly - Parking

You can Select Your Vehicle to check if 3W1Z-2A815-AA fits your vehicle.

The intermediate cable can be removed by taking off the cable adjusting nut from under the vehicle, disconnecting the intermediate cable ends at the left rear and the transverse cable, removing the cable and adjuster bracket assembly, keeping track of the order of the cotter pin, washer, and spring. Then, install the equalizer assembly onto the pin and connect the cable ends before reinstalling the adjusting nut.

For the transverse cable, remove the cable adjusting nut first, followed by disconnecting the cable ends at the right rear of the transverse cable and the intermediate cable. Remove any retaining clips or brackets, take out the cable, reinstall the retaining clips or brackets holding the cable to the body, reconnect the cable ends, and reinstall the adjusting nut.