Mercury F5AZ-2A635-B Cable Assembly - Parking

You can Select Your Vehicle to check if F5AZ-2A635-B fits your vehicle.

To install the front cable, insert it through the floorpan holes and attach it to the control assembly inside the vehicle, ensuring the grommet is properly seated. From underneath the vehicle, fasten the cable to the adjuster bracket.

The intermediate cable can be removed by taking off the cable adjusting nut from under the vehicle, disconnecting the intermediate cable ends at the left rear and the transverse cable, removing the cable and adjuster bracket assembly, keeping track of the order of the cotter pin, washer, and spring. Then, install the equalizer assembly onto the pin and connect the cable ends before reinstalling the adjusting nut.