Mercury 4U2Z-2V200-CA Kit - Brake Shoe And Lining

You can Select Your Vehicle to check if 4U2Z-2V200-CA fits your vehicle.

Some 1995 and later models have modifications in their front brake caliper and brake pads. To replace the brake pads, remove the brake fluid reservoir cover and siphon out half of the brake fluid. Loosen lug nuts, raise and secure the vehicle, and remove the wheels. Inspect the brake disc and remove if machining is needed. Remove the caliper mounting bolts and depress the caliper piston. Remove the caliper and brake pad assembly, then replace the inner and outer brake pads. Apply thread locking compound and grease to the caliper bolts. Hang the caliper from the upper control arm on some models. Tighten the caliper bolts, depress the brake pedal, check the brake fluid level, and top it off if needed.

Some modifications include the pads being indexed into and out of the caliper anchor plate, eliminating the need for retaining clips. Additionally, a new two-piston front caliper was introduced in 1998 and later models.