Make sure this part fits

Mercury 8L8Z-18125-D Shock Absorber Assembly

2008 Mercury Mariner 8L8Z18125D

Customer Questions & Expert Answers (7)
Ford 8L8Z-18125-D Shock Absorber Assembly
  • Part Description
    Shock Absorber Assy
  • Base No.
    18125
  • Replaced By
    8L8Z-18125-B
  • Manufacturer
    Ford
Make sure this part fits
$63.36 MSRP: $104.73
You Save: $41.37 (40%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mercury
    Base No.18125
    Manufacturer Part Number8L8Z-18125-D, 8L8Z18125D
    Part DescriptionShock Absorber Assy
    Item Dimensions31.4 x 3.4 x 3.5 inches
    Item Weight5.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerFord
    SKU8L8Z-18125-D
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008 Mercury Mariner6 Cyl 3.0L DOHC EFI Modular4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
  • Customer Questions & Expert Answers

    Q:
    I am wondering if this is the exact part that fits in Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 8L8Z-18125-D fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What components should be disconnected from the strut before removal for the 2009 Mercury Mariner? Posted by Customer
    A:
    Before removing the strut, the following components should be disconnected: Brake hose bracket from the strut. Speed sensor wiring harness from the strut (if equipped with ABS). Stabilizer bar link from the strut bracket. Brake jounce hose clip (on later models) to move the hose out of the way.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should you do with the floor jack after supporting the trailing arm for the 2005 Mercury Mariner? Posted by Customer
    A:
    Raise the jack slightly to take the spring pressure off the shock absorber lower mount.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done once the strut assembly is completely disassembled, and why for the 2007 Mercury Mariner? Posted by Customer
    A:
    After the strut assembly is completely disassembled, the following steps should be taken: Examine all components for wear and damage. Check the bearing for smoothness of operation. This inspection helps identify any worn or damaged components that need replacement.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What key points should be noted during the reassembly of the strut assembly for the 2007 Ford Escape? Posted by Customer
    A:
    During reassembly of the strut assembly, consider the following key points: Install the coil springs with the paint mark at the bottom. Ensure that the coil spring ends are correctly located in the upper and lower seats before releasing the compressor. Verify that the bearing is correctly installed on the piston rod seat. Tighten the thrust bearing retaining nut to the specified torque.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What are the initial steps before removing the strut, and why are they necessary for the 2011 Ford Escape? Posted by Customer
    A:
    The initial steps include: Loosening the wheel lug nuts. Raising the vehicle securely on jackstands. Removing the wheel. These steps are necessary to create a safe working environment and provide access to the strut assembly.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should you remove the shock absorber from the mounting pin for the 2005 Ford Escape? Posted by Customer
    A:
    Unscrew the shock absorber lower mounting nut, then pull the shock off the mounting pin.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 8L8Z-18125-D, the Right Choice

To ensure reliability, purchase Ford part # 8L8Z-18125-D Shock Absorber Assembly. It is sometimes referred to as Mercury Shock Absorber. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Mercury Mariner models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford 8L8Z18125D Shock Absorber Assembly. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Mercury parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly