Mercury AE5Z-5560-D Spring - Rear

You can Select Your Vehicle to check if AE5Z-5560-D fits your vehicle.

Loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands. Remove the wheel.

Support the trailing arm with another floor jack. If you don't have another floor jack, remove the caliper and hang it out of the way with a length of wire.

Reassembly is a reversal of dismantling, noting the following points: The coil springs must be installed with the paint mark at the bottom. Make sure that the coil spring ends are correctly located in the upper and lower seats before releasing the compressor. When installing the spring, make sure the ends fit into the recessed portion of the seats. Tighten the piston rod nut to the specified torque.