How to remove and install Back Up Light Switch on Ford Bronco II?

The back-up light switch is described to be installed on the Mazda and Mitsubishi transmissions, though it can only be identified when the parking brake is engaged and the gear shift lever is set to Position other than Neutral or Reverse. After that, lift and provide proper standing for the car properly. Despite what the manufacturer says about no fluid leaking from the transmission when the switch is disconnected, it is recommended that a drain pan be placed beneath just in case. Remove the back-up light switch from the transmission by pulling the electrical wire harness plug of the switch and detaching it. Similarly, for putting back the parts follow the procedures followed while removal, and depending on the situation, check the transmission fluid level and add more of it as perhaps required.

Genuine Ford Bronco II Back Up Light Switch

Reverse Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Back Up Light Switches found

View related parts
Ford Bronco II Switch Assy - Reversing Lamp
Part Number: C9TZ-15520-C
$28.50 MSRP: $45.45
You Save: $16.95 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 6L5Z-15520-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1990 Ford Bronco II | 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 2.9L | 3AT C5, 4AT A4LD, 4AT AOD, 4MT, 5MT
View related parts
Ford Bronco II Switch Assembly - Reversing Lamp
Part Number: E3TZ-15520-A
$24.52 MSRP: $48.73
You Save: $24.21 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy - Reversing Lamp; Back-Up Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1989 Ford Bronco II | 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 2.9L | 3AT C5, 4AT A4LD, 4MT, 5MT

Ford Bronco II Back Up Light Switch

The Back Up Light Switch in specially the Ford Bronco II models is just plays the crucial task of completing the circuit that powers up the Reverse Lights when the vehicle is in reverse gear. This switch functions on the basis of converting electric current whereby power supply, get connected to back up lights to enable reversal at aty. The operation of the Back Up Light Switch can differ depending on the constructed vehicle and the type of the transmission, the operation can be mechanical as well as hydraulic. Different designs and technologies of Back Up Light Switch may have been used throughout the production of the Ford Bronco II due to that. These differences are primarily associated with the actuation mechanisms that define operation reliability and sensitivity of the switch.

We provide a wide range of Ford Bronco II Back Up Light Switch at the best prices possible. If you need Ford Bronco II Back Up Light Switch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Bronco II Back Up Light Switch Parts Questions & Experts Answers

Switch Assy - Reversing Lamp
C9TZ-15520-C
Q: How to remove and install Back Up Light Switch on Ford Bronco II?
A: The back-up light switch is described to be installed on the Mazda and Mitsubishi transmissions, though it can only be identified when the parking brake is engaged and the gear shift lever is set to Position other than Neutral or Reverse. After that, lift and provide proper standing for the car properly. Despite what the manufacturer says about no fluid leaking from the transmission when the switch is disconnected, it is recommended that a drain pan be placed beneath just in case. Remove the back-up light switch from the transmission by pulling the electrical wire harness plug of the switch and detaching it. Similarly, for putting back the parts follow the procedures followed while removal, and depending on the situation, check the transmission fluid level and add more of it as perhaps required.