How to remove and install the Headlight Switch on Ford Bronco II?

It is necessary to pull the knob to release the headlight. You need to disconnect the ground cable of the battery. Pulling the knob to the position of the headlight. The shaft release button should be depressed and then, remove the assembly consisting of knob and shaft. Remove the finished panel from the instrument panel. When you unscrew the mounting nut, you can take off the switch, but don't forget about wiring the connector first. Plug in a plug from a wire into an instrument board switch for headlights, install it in an instrument board, and turn a nut on. Don't forget to hang the installed panel assembly on an instrument panel again. Push the shaft into switches with headlamp knobs until they catch. Connect your battery earth and check your light switch.

Genuine Ford Bronco II Headlight Switch

Headlamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Headlight Switch found

View related parts
Ford Bronco II Switch Assembly
Part Number: E7TZ-11654-B
Product Specifications
- Other Name: Switch Assy
- Replaced by: 6C2Z-11654-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1987-1990 Ford Bronco II | 6 Cyl 2.9L | 4AT A4LD, 4AT AOD, 4MT, 5MT

Ford Bronco II Headlight Switch

According to the COE, the Headlight Switch is majorly used in Ford Bronco II and it play a central part in vehicle safety from the aspect of headlights operation. Its main purpose is to switch the headlights on and off and to provide for the regulation of the brightness of the beams produced. This control is very important because it allows for visibility for a number of driving conditions. While nearly assemblies of Headlight Switch may have been used to equip the Bronco II at some points of the years, the details of the differencing variations are inapplicable. The primary concern lays still with the fact that the switch should able to handle the control of functions of the headlight in an efficient manner so that the drivers are able to adjust the lighting in response to their safety needs. In general, the Headlight Switch plays a critical role in the process of controlling the lights of the vehicle, bringing an improvement at the safety of the car as well as for the driver and other users of the road.

We provide a wide range of Ford Bronco II Headlight Switch at the best prices possible. If you need Ford Bronco II Headlight Switch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Bronco II Headlight Switch Parts Questions & Experts Answers

Switch Assembly
E7TZ-11654-B
Q: How to remove and install the Headlight Switch on Ford Bronco II?
A: It is necessary to pull the knob to release the headlight. You need to disconnect the ground cable of the battery. Pulling the knob to the position of the headlight. The shaft release button should be depressed and then, remove the assembly consisting of knob and shaft. Remove the finished panel from the instrument panel. When you unscrew the mounting nut, you can take off the switch, but don't forget about wiring the connector first. Plug in a plug from a wire into an instrument board switch for headlights, install it in an instrument board, and turn a nut on. Don't forget to hang the installed panel assembly on an instrument panel again. Push the shaft into switches with headlamp knobs until they catch. Connect your battery earth and check your light switch.