How to replace the blower motor resistor and blower motor on Ford Edge?

The blower motor resistor, works with the HVAC module to adjust the speed of the blower motor. To replace the blower motor resistor, remove the glove box and disconnect the electrical connector from the resistor and remove the mounting screws and take out the resistor from the evaporator housing.

Genuine Ford Edge Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Blower Motor Resistors found

View related parts
Ford Edge Control
Part Number: G3GZ-19E624-A
$46.06 MSRP: $73.45
You Save: $27.39 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Module, Controller, Resistor
- Replaces: DG9Z-19E624-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2024 Ford Edge | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L DOHC, 4 Cyl 2.0L Duratorq-TDCi (132kW/180PS), 4 Cyl 2.0L EcoBoost (240PS), 6 Cyl 2.7 L GAS, 6 Cyl 2.7L, 6 Cyl 3.5L Cyclone Petrol TIVCT | 6-Speed Automatic Transmission 6DCT450 - MPS6, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transaxle - MMT6, 8-Speed Automatic Transmission 8F57, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, RHD 4WD (FTD)
View related parts
Ford Edge Control
Part Number: DG9Z-19E624-A
$46.06 MSRP: $73.45
You Save: $27.39 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: G3GZ-19E624-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Edge | 4 Cyl 2.0L DOHC, 4 Cyl 2.0L Duratorq-TDCi (132kW/180PS) , 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 2.7L, 6 Cyl 3.5L Cyclone Petrol TIVCT | 6-Speed Automatic Transmission 6DCT450 - MPS6, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transaxle - MMT6, 8-Speed Automatic Transmission 8F57, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, RHD 4WD (FTD)
View related parts
Ford Edge Control
Part Number: 7T4Z-19E624-A
$156.20 MSRP: $258.18
You Save: $101.98 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Module, Resistor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Edge | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Edge Resistor Assembly
Part Number: 7T4Z-19A706-A
$38.16 MSRP: $75.82
You Save: $37.66 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor Assy; Resistor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Edge | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Ford Edge Blower Motor Resistor Parts Questions & Experts Answers

Control
7T4Z-19E624-A
Q: How to replace the blower motor resistor and blower motor on Ford Edge?
A: The blower motor resistor, works with the HVAC module to adjust the speed of the blower motor. To replace the blower motor resistor, remove the glove box and disconnect the electrical connector from the resistor and remove the mounting screws and take out the resistor from the evaporator housing.