How do you replace the Intake Manifold Temperature Sensor and Mass Air Flow Sensor on Ford Edge?

To remove the air intake duct, disconnect the electrical connector from the MAF/Intake Manifold Temperature Sensor placed on the air filter housing cover. Then, remove the MAF/Intake Manifold Temperature Sensor mounting fasteners and take out the sensor from the air filter housing. Installation is the reverse of the removal.

Genuine Ford Edge Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Mass Air Flow Sensors found

View related parts
Ford Edge Sensor Assembly
Part Number: 8V2Z-12B579-A
$119.90 MSRP: $198.18
You Save: $78.28 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assy; Air Mass Sensor, Mass Air Flow Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Edge | 4 Cyl 2.0L EcoBoost (240PS) | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Edge Sensor Assembly
Part Number: 3L3Z-12B579-BA
$152.90 MSRP: $252.73
You Save: $99.83 (40%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assy
- Manufacturer Note: 4.6L, Police
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Edge | 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Ford Edge Mass Air Flow Sensor

Known as the Mass Air Flow Sensor (MAF) of Ford Edge cars, this part is significant in controlling the flow of air to the car engine. This information is delivered to the Powertrain Control Module (PCM), and the fuel injector timing is changed by it to keep right air-fuel mixture. MAF sensors used in Ford Edge has been Vane Meter (VAF) type and the Hot Wire type has also been used. Whereas the VAF sensor is mechanically connected and deprived of airflow and wear issues, Hot Wire sensor is higher accurate as it measure current changes in heated wire however it contaminated. Correct tuning of the Mass Air Flow Sensor must always be done and more so in cases where alterations in the performance parts have been made, large amounts of air may overcome the sensor's capacity. Thus, a prudent owner of Ford Edge understand the importance of routine maintenance, even if this will involve a small amount of cleaning of the MAF sensor in order eliminate chance of stalling or incorrect air-fuel ratio that can accrue from bad sensors.

We provide a wide range of Ford Edge Mass Air Flow Sensor at the best prices possible. If you need Ford Edge Mass Air Flow Sensor, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Edge Mass Air Flow Sensor Parts Questions & Experts Answers

Sensor Assembly
3L3Z-12B579-BA
Q: How do you replace the Intake Manifold Temperature Sensor and Mass Air Flow Sensor on Ford Edge?
A: To remove the air intake duct, disconnect the electrical connector from the MAF/Intake Manifold Temperature Sensor placed on the air filter housing cover. Then, remove the MAF/Intake Manifold Temperature Sensor mounting fasteners and take out the sensor from the air filter housing. Installation is the reverse of the removal.