How to remove and install a fuel injector and fuel rail assembly on Ford Explorer Sport Trac?

Begin by relieving the fuel pressure and disconnecting the battery cable to remove the fuel rail assembly. Then, remove the upper intake manifold from the lower intake manifold. Disconnect the fuel feed and return lines from the fuel rail assembly. The fuel injector connectors should be disconnected and so should the fuel rail retaining bolts/studs. Thereafter, lift together the fuel rail and injectors from the lower intake manifold. Rock it side-to-side and remove it from the fuel rail if you want to remove a fuel injector. Replace O-rings and plastic "hats" as necessary. When installing new O-rings, make sure that injector caps are clean and lubricate them before threading into lower intake manifold. Placing the fuel rail over injectors ensuring injectors stay in place using retaining bolts/studs. Perform remaining steps in reverse for re-installation.

Genuine Ford Explorer Sport Trac Fuel Rail

Engine Fuel Rail

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fuel Rails found

View related parts
Ford Explorer Sport Trac Fuel Rail
Part Number: 1L2Z-9D280-ED
$142.50 MSRP: $208.33
You Save: $65.83 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Fuel Supply
- Position: Passenger Side
- Replaces: 1L2Z-9D280-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, Four-Wheel Drive, Left Hand Drive, Two-Wheel Drive
View related parts
Ford Explorer Sport Trac Fuel Supply Manifold Assembly
Part Number: 6L2Z-9D280-A
Product Specifications
- Other Name: Manifold Assembly - Fuel Supply; Fuel Rail
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission 5R55S, 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission 6R60, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Explorer Sport Trac Fuel Supply Manifold Assembly
Part Number: 6L2Z-9D280-B
Product Specifications
- Other Name: Manifold Assembly - Fuel Supply; Fuel Rail
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission 5R55S, 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission 6R60, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Explorer Sport Trac Fuel Supply Manifold Assembly
Part Number: 7L2Z-9F792-A
Product Specifications
- Other Name: Manifold Assembly - Fuel Supply; Fuel Rail
- Replaces: 6L2Z-9F792-EC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | 8 Cyl 4.6L | 5-Speed Automatic Transmission 5R55S, 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission 6R60, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Explorer Sport Trac Fuel Supply Manifold Assembly
Part Number: 4L2Z-9D280-AA
Product Specifications
- Other Name: Manifold Assembly - Fuel Supply
- Manufacturer Note: (RH)
- Position: Driver Side
- Replaced by: 4L2Z-9D280-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Explorer Sport Trac | 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, Four-Wheel Drive, Left Hand Drive, Two-Wheel Drive
View related parts
Ford Explorer Sport Trac Fuel Supply Manifold Assembly
Part Number: 6L2Z-9F792-EC
Product Specifications
- Other Name: Manifold Assembly - Fuel ; Manifold Assy - Fuel Supply
- Replaced by: 7L2Z-9F792-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Ford Explorer Sport Trac | 8 Cyl 4.6L | 5-Speed Automatic Transmission 5R55S, 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission 6R60, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

Ford Explorer Sport Trac Fuel Rail

We provide a wide range of Ford Explorer Sport Trac Fuel Rail at the best prices possible. If you need Ford Explorer Sport Trac Fuel Rail, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Explorer Sport Trac Fuel Rail Parts Questions & Experts Answers

Fuel Supply Manifold Assembly
4L2Z-9D280-AA
Q: How to remove and install a fuel injector and fuel rail assembly on Ford Explorer Sport Trac?
A: Begin by relieving the fuel pressure and disconnecting the battery cable to remove the fuel rail assembly. Then, remove the upper Intake Manifold from the lower intake manifold. Disconnect the fuel feed and return lines from the fuel rail assembly. The fuel injector connectors should be disconnected and so should the fuel rail retaining bolts/studs. Thereafter, lift together the fuel rail and injectors from the lower intake manifold. Rock it side-to-side and remove it from the fuel rail if you want to remove a fuel injector. Replace O-rings and plastic "hats" as necessary. When installing new O-rings, make sure that injector caps are clean and lubricate them before threading into lower intake manifold. Placing the fuel rail over injectors ensuring injectors stay in place using retaining bolts/studs. Perform remaining steps in reverse for re-installation.