How do you replace the ignition switch on Ford Explorer Sport Trac?

To replace the ignition switch, another matter is to remove the negative battery cable and the positive battery cable if the car is fitted with airbags. Rotate the ignition key lock cylinder as far as possible to the right, by turning it anti-clockwise. There are two panels known as driver side lower instrument panel cover and the reinforcement panel which must be unbolted. The ignition switch electrical connector and, in turn, the switch retaining screws has to be disconnected. Release the ignition switch from the actuator rod and remove the switch out of the car. Make sure the new ignition switch is in the OFF state and then position it on the required position and hook the actuator rod. This part has to be fitted and fixed in place using the tightening of the retaining screws. Last, the other remaining steps are what remains of the installation and as always be sure to check the switch going to lock, start, accessory and make sure it is working properly.

Genuine Ford Explorer Sport Trac Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ignition Switches found

View related parts
Ford Explorer Sport Trac Switch Assembly - Ignition
Part Number: 98AZ-11572-A
$59.95 MSRP: $99.09
You Save: $39.14 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assy - Ignition
- Replaced by: DG9Z-11572-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | 6 Cyl 4.0L SOHC EFI, 8 Cyl 4.6L | 5-Speed Automatic Transmission 5R55S, 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission 6R60, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Explorer Sport Trac Switch Assembly - Ignition
Part Number: 5C3Z-11572-AA
$44.46 MSRP: $70.91
You Save: $26.45 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy - Ignition; Ignition Switch
- Manufacturer Note: SWITCH, IGNITION ASM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Ford Explorer Sport Trac | 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, Four-Wheel Drive, Left Hand Drive, Two-Wheel Drive
View related parts
Ford Explorer Sport Trac Switch Assembly - Ignition
Part Number: F4DZ-11572-B
$43.78 MSRP: $69.82
You Save: $26.04 (38%)
ADD TO CART
Product Specifications
- Other Name: Switch Assy - Ignition; Ignition Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2004 Ford Explorer Sport Trac | 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, Four-Wheel Drive, Left Hand Drive, Two-Wheel Drive

Ford Explorer Sport Trac Ignition Switch

The Ignition Switch is an important component within car and especially within Ford Explorer Sport Trac vehicles, which is involved in the ignition and charging process as well as starting the engine and controlling the circuits for parts like radio, power window and so forth. With the help of key, button, or remote control in turning the Ignition Switch the command to the vehicle computer is given to start the starter motor along with the operations of the ignition system. Through the years, changes in the styles of Ignition Switches of 'Ford Explorer Sport Trac' models have been observed where in the use of traditional mechanical key was used then shift to keyless type that uses push buttons. Where as the first one uses a key to unlock the system the second one still uses a transponder signal to start the system. However, there are some improvements on the basic function of the Ignition Switch in different models to make an effective starting of the engines and switching on of the different systems of the Ford Explorer Sport Trac.

We provide a wide range of Ford Explorer Sport Trac Ignition Switch at the best prices possible. If you need Ford Explorer Sport Trac Ignition Switch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Explorer Sport Trac Ignition Switch Parts Questions & Experts Answers

Switch Assembly - Ignition
5C3Z-11572-AA
Q: How do you replace the ignition switch on Ford Explorer Sport Trac?
A: To replace the ignition switch, another matter is to remove the negative battery cable and the positive battery cable if the car is fitted with airbags. Rotate the ignition key lock cylinder as far as possible to the right, by turning it anti-clockwise. There are two panels known as driver side lower instrument panel cover and the reinforcement panel which must be unbolted. The ignition switch electrical connector and, in turn, the switch retaining screws has to be disconnected. Release the ignition switch from the actuator rod and remove the switch out of the car. Make sure the new ignition switch is in the OFF state and then position it on the required position and hook the actuator rod. This part has to be fitted and fixed in place using the tightening of the retaining screws. Last, the other remaining steps are what remains of the installation and as always be sure to check the switch going to lock, start, accessory and make sure it is working properly.