How to remove and install balljoints on different types of axles on Ford F-250?

Use the balljoint removal/installation tool to remove the upper balljoint first, then the lower one. Do not heat the axle. To install, use the tool to seat the lower balljoint first, then the upper one. Install the snap-rings and reinstall the spindle. Remove the spindle/knuckle and lower balljoint snap ring. Use the tool to press out the lower balljoint first, then the upper one, and then install the new upper balljoint, then the lower one along with the lower balljoint snap-ring, and reinstall the spindle/knuckle.

Genuine Ford F-250 Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Ball Joints found

View related parts
Ford F-250 Joint Assembly - Ball
Part Number: F6TZ-3050-FB
$57.66 MSRP: $110.36
You Save: $52.70 (48%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Joint Assy - Ball
- Position: Lower
- Replaced by: 8C3Z-3050-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
View related parts
Ford F-250 Joint Assembly - Ball
Part Number: F5UZ-3V049-A
$30.11 MSRP: $41.14
You Save: $11.03 (27%)
ADD TO CART
Product Specifications
- Other Name: Joint Assy - Ball
- Manufacturer Note: 4x2
- Replaced by: 2U2Z-3V049-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1997 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 4.6L, 8 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 4AT 4R70W, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Joint Assembly - Ball
Part Number: F5UZ-3049-A
$38.86 MSRP: $55.83
You Save: $16.97 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assy - Ball
- Position: Upper
- Replaced by: 5C2Z-3049-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1997 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 4.6L, 8 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 4AT 4R70W, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Joint Assembly - Ball
Part Number: F57Z-3V050-BB
$45.75 MSRP: $90.91
You Save: $45.16 (50%)
ADD TO CART
Product Specifications
- Other Name: Joint Assy - Ball
- Manufacturer Note: under #8500 GVW
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
View related parts
Ford F-250 Joint Assembly - Ball
Part Number: F6TZ-3V049-AA
Product Specifications
- Other Name: Joint Assy - Ball
- Replaced by: 2U2Z-3V049-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1997 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 4.6L, 8 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 4AT 4R70W, 4AT AOD, 4AT E4OD, 4MT, 5MT

Ford F-250 Ball Joint

The Ball Joint of Ford F-250 vehicles is one of the essential automotive suspension and steering parts as it joins the control arms to the steering knuckles. These ball joints permits free rotation in two planes but they operate in inhibiting translation and thus improving the vehicle response. A typical ball joint is made of steel and is composed of a bearing stud and socket sheathed in a rubber boot, or grommet to protect it from dirt while at the same time allowing the lubricant to flow. Some of the classifications of the ball joints include loaded and unloaded joints refer to the ball joints' uses and position the mounts. Signs that ball joint is worn include; there is normally a noise, tires wearing out unevenly, vehicle pulling or steering off axis, and these requires replacement for safe road conditions. Besides, performance ball joints have provided with some adjustable settings that can be useful for alterations of the suspension geometry and consistent operating clearance without high friction.

We provide a wide range of Ford F-250 Ball Joint at the best prices possible. If you need Ford F-250 Ball Joint, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford F-250 Ball Joint Parts Questions & Experts Answers

Joint Assembly - Ball
F5UZ-3049-A
Q: How to remove and install balljoints on different types of axles on Ford F-250?
A: Use the balljoint removal/installation tool to remove the upper balljoint first, then the lower one. Do not heat the axle. To install, use the tool to seat the lower balljoint first, then the upper one. Install the snap-rings and reinstall the spindle. Remove the spindle/knuckle and lower balljoint snap ring. Use the tool to press out the lower balljoint first, then the upper one, and then install the new upper balljoint, then the lower one along with the lower balljoint snap-ring, and reinstall the spindle/knuckle.