Q: How to remove and install the power steering pump on Ford Mustang?
A: To remove and install the power steering pump pulley on VB engines, start by removing the drivebelt and raising the vehicle. Use a pulley removal tool to remove the pulley on V8 models. Position a drain pan under the pump and disconnect the hoses, plugging them to avoid contamination. Remove the shield and pump mounting fasteners, being careful not to spill fluid. To reinstall, use a new seal on the pressure line fitting and tighten to the specified torque. Use a special tool to reinstall the pulley, avoiding a hammer or press. Fill the reservoir with recommended fluid and bleed the system.