How to install a key lock cylinder and latch in a trunk lid on Ford Taurus?

In order to replace the key lock cylinder, to put the new rivets in the door one needs a special rivet installation tool. Start with the pull-down strap fasteners and the strap and then pry the pin type fasteners with a plastic trim tool and then pull out the trunk lid trim panel. Finally, some irregularities may occur when the trunk lid actuator cable is removed from the key lock cylinder, and the electrical connector disconnected from the lock cylinder is removed. Two rivets are to be drilled out separating the lock cylinder and it should be pulled out. For reinstallctions, removal should be done in the reverse order that they were done in. For the latch start with the removal of the trim panel and then you will have to unplug the electrical connectors of the trunk lid latch. After that, it is necessary to remove the latch mounting nuts and then the latch itself is to be removed. As mentioned earlier, reinstallation has to be done from right from the bottom and has to progress upwards in a sequential manner, that is, a process that is almost similar to that of removal in reverse.

Genuine Ford Taurus Trunk Latch

Rear Trunk Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Trunk Latches found

View related parts
Ford Taurus Lock Assembly
Part Number: DA5Z-5443200-A
$76.95 MSRP: $112.50
You Save: $35.55 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy; Lock, Lock Actuator, Trunk Lock
- Replaces: 8G1Z-5443200-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2019 Ford Taurus | 4 Cyl 2.0L EcoBoost (240PS), 6 Cyl 3.5L Cyclone Petrol TIVCT, 6 Cyl 3.5L DOHC T/C, 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, CVT Select Shift Transmission, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Lock Assembly
Part Number: 8G1Z-5443200-A
$76.95 MSRP: $112.50
You Save: $35.55 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy
- Replaced by: DA5Z-5443200-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2012 Ford Taurus | 6 Cyl 3.5L DOHC T/C, 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, CVT Select Shift Transmission, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Lock Assembly
Part Number: DG1Z-5443200-A
$83.79 MSRP: $152.63
You Save: $68.84 (46%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Actuator, Trunk Lock
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 3.5L Cyclone Petrol TIVCT, 6 Cyl 3.5L DOHC T/C, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Taurus Lock Assembly
Part Number: F2DZ5443200B
$41.57 MSRP: $57.74
You Save: $16.17 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy; Latch, Lock
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1995 Ford Taurus | 6 Cyl 3.0L, 6 Cyl 3.2L, 6 Cyl 3.8L | 4AT AX4N, 4AT AX4S, 4AT AXOD-E, 5MT
View related parts
Ford Taurus Lock Assembly
Part Number: 4F1Z-5443200-AA
Product Specifications
- Other Name: Lock Assy
- Replaced by: 4F1Z-5443200-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Taurus | 6 Cyl 3.0L | 4AT 4F50N
View related parts
Ford Taurus Tailgate Latch Assembly
Part Number: F8DZ-5443200-AA
Product Specifications
- Other Name: Latch Assembly - Tailgate
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998 Ford Taurus | 6 Cyl 3.0L, 8 Cyl 3.4L | 4AT AX4N, 4AT AX4S
View related parts
Ford Taurus Tailgate Latch Assembly
Part Number: XF1Z-5443200-AA
Product Specifications
- Other Name: Latch Assembly - Tailgate; Latch, Lock
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999 Ford Taurus | 6 Cyl 3.0L, 8 Cyl 3.4L | 4AT AX4N, 4AT AX4S
View related parts
Ford Taurus Tailgate Latch Assembly
Part Number: YF1Z-5443200-AA
Product Specifications
- Other Name: Latch Assembly - Tailgate; Latch, Lock
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2002 Ford Taurus | 6 Cyl 3.0L | 4AT 4F50N, 4AT AX4N, 4AT AX4S

Ford Taurus Trunk Latch

Ford Taurus anti theft immobilizer details: The Trunk Latch of Ford Taurus vehicles is the component that is responsible for the trunk lid which needs to be closed during the journey and it is also protects the stored articles in the trunk from being stolen. This works just like the seat belt where it works along a locked position that had to be activated in order to unlock. Made from such materials as stainless steel in an attempt to make it more secure and rationed from other external forces such as winds to avoid situations where the trunk opens on its own and causes loss of goods in transit. Throughout the years using Trunk Latch in Ford Taurus, there are different styles of the Trunk Latch used in order to increase the security and reliability. Apart from protecting the items stored in the boot, a perfect working of Trunk Latch can also serve the purpose of security of the car. Hence it is important that the Ford Taurus trunk latches are well maintained and any that that fails to work or has worn out should be replaced immediately.

We provide a wide range of Ford Taurus Trunk Latch at the best prices possible. If you need Ford Taurus Trunk Latch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Taurus Trunk Latch Parts Questions & Experts Answers

Lock Assembly
8G1Z-5443200-A
Q: How to install a key lock cylinder and latch in a trunk lid on Ford Taurus?
A: In order to replace the key lock cylinder, to put the new rivets in the door one needs a special rivet installation tool. Start with the pull-down strap fasteners and the strap and then pry the pin type fasteners with a plastic trim tool and then pull out the trunk lid trim panel. Finally, some irregularities may occur when the trunk lid actuator cable is removed from the key lock cylinder, and the electrical connector disconnected from the lock cylinder is removed. Two rivets are to be drilled out separating the lock cylinder and it should be pulled out. For reinstallctions, removal should be done in the reverse order that they were done in. For the latch start with the removal of the trim panel and then you will have to unplug the electrical connectors of the trunk lid latch. After that, it is necessary to remove the latch mounting nuts and then the latch itself is to be removed. As mentioned earlier, reinstallation has to be done from right from the bottom and has to progress upwards in a sequential manner, that is, a process that is almost similar to that of removal in reverse.