How to remove and install an ignition switch on Lincoln Town Car?

The ignition switch can be removed by disconnecting the cable from the negative battery terminal. The covers of the steering column and knee bolster should be removed. For old models, the column is lowered after removing the retention nuts. On new models, remove the metal reinforcement panel. Remove the switch screws and unplug its electrical connector. Disengage the actuator pin from the switch. To install, ensure the new switch is in the "Run" position. Place it on the actuator pin and install retaining screws. With that done connect the electrical connector then install the upper steering column cover. Lastly, raise the column and install nuts for retaining purposes. Install lower column covers then insulator panel.

Genuine Lincoln Town Car Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Ignition Switches found

View related parts
Lincoln Town Car Switch Assembly - Ignition
Part Number: 5W1Z-11572-AA
$40.24 MSRP: $64.18
You Save: $23.94 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy - Ignition; Ignition Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Lincoln Town Car | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R70E W/TSS, 4-Speed Automatic Transmission AODEW/4R70E W/TSS*S/V, 4-Speed Automatic Transmission AODEW/4R75E W/TSS S/V, 4-Speed Automatic Transmission NAAO AODEW/4R70W*S/VIL, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Lincoln Town Car Switch Assembly - Ignition
Part Number: F29Z-11572-D
$28.50 MSRP: $45.45
You Save: $16.95 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy - Ignition; Ignition Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1982-1989 Lincoln Town Car | 8 Cyl 5.0L | 4AT AOD
View related parts
Lincoln Town Car Switch Assembly - Ignition
Part Number: F4DZ-11572-B
$43.78 MSRP: $69.82
You Save: $26.04 (38%)
ADD TO CART
Product Specifications
- Other Name: Switch Assy - Ignition; Ignition Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-2004 Lincoln Town Car | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 5.0L | 4AT, 4AT 4R70W, 4AT AOD, 4AT AODE, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R70E W/TSS, 4-Speed Automatic Transmission AODEW/4R70E W/TSS*S/V, 4-Speed Automatic Transmission AODEW/4R75E W/TSS S/V, 4-Speed Automatic Transmission NAAO AODEW/4R70W*S/VIL, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Lincoln Town Car Switch Assembly - Ignition
Part Number: F1VY-19A438-A
Product Specifications
- Other Name: SWITCH ASY - IGNITIO
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991 Lincoln Town Car | 8 Cyl 4.6L | 4AT AOD
View related parts
Lincoln Town Car Switch Assembly - Ignition
Part Number: F4LY-19A438-A
Product Specifications
- Other Name: Switch Assy - Ignition
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1997 Lincoln Town Car | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT AOD, 4AT AODE

Lincoln Town Car Ignition Switch Parts Questions & Experts Answers

Switch Assembly - Ignition
F4DZ-11572-B
Q: How to remove and install an ignition switch on Lincoln Town Car?
A: The ignition switch can be removed by disconnecting the cable from the negative battery terminal. The covers of the steering column and knee bolster should be removed. For old models, the column is lowered after removing the retention nuts. On new models, remove the metal reinforcement panel. Remove the switch screws and unplug its electrical connector. Disengage the actuator pin from the switch. To install, ensure the new switch is in the "Run" position. Place it on the actuator pin and install retaining screws. With that done connect the electrical connector then install the upper steering column cover. Lastly, raise the column and install nuts for retaining purposes. Install lower column covers then insulator panel.