Make sure this part fits

Ford 8L1Z-18124-DP Kit - Shock Absorber

2008-2010 Ford 8L1Z18124DP

Customer Questions & Expert Answers (9)
Ford 8L1Z-18124-DP Kit - Shock Absorber
  • Part Description
    Kit - Shock Absorber
  • Base No.
    18124
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.18124
    Manufacturer Part Number8L1Z-18124-DP, 8L1Z18124DP
    Part DescriptionKit - Shock Absorber
    Other NamesShock Absorber
    Item Dimensions25.5 x 5.7 x 5.7 inches
    Item Weight7.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerFord
    SKU8L1Z-18124-DP
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008-2010 Ford Expedition8 Cyl 5.4L4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
    2008-2010 Lincoln Navigator8 Cyl 5.4L4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
  • Customer Questions & Expert Answers

    Q:
    I am wondering if this is the exact part that fits in Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 8L1Z-18124-DP fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What steps should be followed to remove the toe link rod for the 2009 Lincoln Navigator? Posted by Customer
    A:
    Remove the inner end nut and knuckle nut, and then remove the rod.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What steps should be taken to remove the shock absorber from below the 2005 Lincoln Navigator? Posted by Customer
    A:
    Working from underneath the vehicle, remove the two nuts (2WD models) or bolt and nut (4WD models) that attach the lower end of the shock absorber to the lower control arm, and then pull the shock out from below.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How can you check for movement at the steering knuckle-to-control arm balljoint for the 2009 Lincoln Navigator? Posted by Customer
    A:
    Clean the lower end of the steering knuckle and have an assistant grasp the lower edge of the tire, moving the wheel in-and-out while you look for any movement at the steering knuckle-to-control arm balljoint. If there is any movement, the suspension balljoint(s) must be replaced.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should you ensure when installing the nuts and bolts for the 2007 Lincoln Navigator? Posted by Customer
    A:
    Make sure they are facing in the proper direction.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    Which specific components are discussed in the instructions for the 2005 Ford Expedition? Posted by Customer
    A:
    The specific components discussed include the rear hub/bearing assemblies, driveaxles, and shock/spring assemblies.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should you do if fluid leakage is observed in the shock absorbers for the 2002 Ford Expedition? Posted by Customer
    A:
    If leakage is noted, replace the shocks as a set. However, a light film of fluid is no cause for concern.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should you do if you're removing an upper or lower suspension arm for the 2008 Ford Expedition? Posted by Customer
    A:
    Remove the indicated bolts.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you detach the upper end of the shock absorber from the frame bracket for the 2000 Ford Expedition? Posted by Customer
    A:
    To detach the upper end of the shock absorber from the frame bracket, you need to remove the upper nut, the retainer, and the bushing. A back-up wrench on the lower nut is necessary to prevent the shock from turning when you loosen the nut. Remove the retainer and bushing.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 8L1Z-18124-DP, the Right Choice

To ensure reliability, purchase Ford part # 8L1Z-18124-DP Kit - Shock Absorber. It is sometimes referred to as Ford Shock Absorber. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford Expedition models. It fits Lincoln Navigator.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford 8L1Z18124DP Kit - Shock Absorber. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly