Make sure this part fits

Ford 8L1Z-18125-CB Kit - Shock Absorber

2008 Ford 8L1Z18125CB

Customer Questions & Expert Answers (9)
Ford 8L1Z-18125-CB Kit - Shock Absorber
  • Part Description
    Kit - Shock Absorber
  • Base No.
    18125
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.18125
    Manufacturer Part Number8L1Z-18125-CB, 8L1Z18125CB
    Part DescriptionKit - Shock Absorber
    Other NamesShock Absorber
    Item Dimensions26.3 x 3.2 x 3.2 inches
    Item Weight8.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerFord
    SKU8L1Z-18125-CB
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008 Ford Expedition8 Cyl 5.4L4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
    2008 Lincoln Navigator8 Cyl 5.4L4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
  • Customer Questions & Expert Answers

    Q:
    I am wondering if this is the exact part that fits in Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 8L1Z-18125-CB fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How should the brake drum be removed for the 2006 Lincoln Navigator? Posted by Customer
    A:
    Spray penetration oil around the flange and studs if it's stuck due to corrosion. If it's locked onto the shoes due to excessive wear, remove the plug in the access hole and back off the adjuster wheel.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How can you check for movement at the steering knuckle-to-control arm balljoint for the 1998 Lincoln Navigator? Posted by Customer
    A:
    Clean the lower end of the steering knuckle and have an assistant grasp the lower edge of the tire, moving the wheel in-and-out while you look for any movement at the steering knuckle-to-control arm balljoint. If there is any movement, the suspension balljoint(s) must be replaced.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should you do after blocking the front wheels for the 2008 Lincoln Navigator? Posted by Customer
    A:
    Remove the rear wheels.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What steps should be taken to remove the shock absorber from below the 1998 Ford Expedition? Posted by Customer
    A:
    Working from underneath the vehicle, remove the two nuts (2WD models) or bolt and nut (4WD models) that attach the lower end of the shock absorber to the lower control arm, and then pull the shock out from below.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What steps are involved in removing the front wheels and the upper shock mounting nut for the 2006 Lincoln Navigator? Posted by Customer
    A:
    You should first loosen the front wheel lug nuts, then raise the front of the vehicle and support it securely on jackstands. After applying the parking brake, remove the wheels. To remove the upper shock mounting nut, use an open-end wrench to hold the shock from turning while removing the nut.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    Is there any emphasis on simulating ride height before final tightening for the 2007 Ford Expedition? Posted by Customer
    A:
    Yes, the importance of simulating ride height before final tightening is emphasized.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should you do after blocking the front wheels for the 2009 Ford Expedition? Posted by Customer
    A:
    Remove the rear wheels.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should you inspect when checking the shocks for the 2002 Ford Expedition? Posted by Customer
    A:
    Check that the shocks are securely mounted and undamaged. Also, inspect the upper mounts for damage and wear.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 8L1Z-18125-CB, the Right Choice

To ensure reliability, purchase Ford part # 8L1Z-18125-CB Kit - Shock Absorber. It is sometimes referred to as Ford Shock Absorber. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford Expedition models. It fits Lincoln Navigator.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford 8L1Z18125CB Kit - Shock Absorber. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly