Make sure this part fits

Ford 8L1Z-18125-CH Kit - Shock Absorber

2008 Ford 8L1Z18125CH

Customer Questions & Expert Answers (9)
Ford 8L1Z-18125-CH Kit - Shock Absorber
  • Part Description
    Kit - Shock Absorber
  • Base No.
    18125
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.18125
    Manufacturer Part Number8L1Z-18125-CH, 8L1Z18125CH
    Part DescriptionKit - Shock Absorber
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerFord
    SKU8L1Z-18125-CH
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008 Ford Expedition8 Cyl 5.4L4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
    2008 Lincoln Navigator8 Cyl 5.4L4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
  • Customer Questions & Expert Answers

    Q:
    I am wondering if this is the exact part that fits in Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 8L1Z-18125-CH fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What should you do after turning off the air suspension system for the 2001 Lincoln Navigator? Posted by Customer
    A:
    Loosen the wheel lug nuts.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should you go about installing the shock absorber after removal for the 2005 Lincoln Navigator? Posted by Customer
    A:
    For installation, reverse the removal process. Ensure you tighten the upper mounting nut and the lower mounting bolts securely. On vehicles with four-wheel air suspension, make sure that at least 1/8-inch of air line is inserted into the red fitting. Lower the vehicle and reactivate the air suspension system, if equipped.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should the shock/spring assembly be replaced for the 2006 Lincoln Navigator? Posted by Customer
    A:
    Position a jack under the steering knuckle, remove the nuts securing the top of the assembly, and lower the jack. Remove the lower control arm-to-spring bolt and nut, then remove the assembly.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should you repeat the shock absorber check for the 2007 Lincoln Navigator? Posted by Customer
    A:
    Repeat the same check at each of the three remaining corners of the vehicle.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How can you check for play in the steering system components for the 2000 Ford Expedition? Posted by Customer
    A:
    Grasp each front tire at the front and rear edges, push in at the front, pull out at the rear, and feel for play in the steering system components. If any free play is noted, check the idler arm and the tie-rod ends for looseness.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should you do after removing the shock absorber for the 1998 Ford Expedition? Posted by Customer
    A:
    Install the shock absorber in the reverse order of removal.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you detach the upper end of the shock absorber from the frame bracket for the 1999 Ford Expedition? Posted by Customer
    A:
    To detach the upper end of the shock absorber from the frame bracket, you need to remove the upper nut, the retainer, and the bushing. A back-up wrench on the lower nut is necessary to prevent the shock from turning when you loosen the nut. Remove the retainer and bushing.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What are some steps and precautions for working on the 2004 Ford Expedition suspension components? Posted by Customer
    A:
    Some steps and precautions include turning off the air suspension system, raising the vehicle securely on jackstands, and removing the wheels as needed for access.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 8L1Z-18125-CH, the Right Choice

To ensure reliability, purchase Ford part # 8L1Z-18125-CH Kit - Shock Absorber. It is sometimes referred to as Ford Shock Absorber. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford Expedition models. It fits Lincoln Navigator.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford 8L1Z18125CH Kit - Shock Absorber. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly