Ford 8R3Z-18125-J Kit - Shock Absorber

You can Select Your Vehicle to check if 8R3Z-18125-J fits your vehicle.

To remove the coil spring from the strut assembly, a spring compressor should be installed on the spring, compressing it enough to relieve pressure from the upper bearing assembly. The compressed spring should then be carefully lifted from the assembly and set aside.

Slide the steering knuckle into the strut flange and insert the bolts. Install the nuts and tighten the bolts to the specified torque.

If you suspect worn or weak shock absorbers, repeat the check at each of the three remaining corners of the vehicle. Additionally, raise the vehicle and support it securely on jackstands to inspect the shock absorbers for evidence of fluid leakage. Some light film of fluid is generally not a cause for concern, but if significant leakage is noticed, it's advisable to replace the shocks as a set. Ensure that the leakage is from the shocks and not another source. Check the shocks to make sure they are securely mounted and undamaged. Also, inspect the upper mounts for damage and wear.

Raising the axle so that the shock compresses to the reference mark simulates the position of the vehicle's suspension when it's sitting at normal ride height, ensuring proper shock absorber installation.