Ford BR3Z-18125-GA Kit - Shock Absorber

You can Select Your Vehicle to check if BR3Z-18125-GA fits your vehicle.

Slide the steering knuckle into the strut flange and insert the bolts. Install the nuts and tighten the bolts to the specified torque.

To check the shock absorbers, park the vehicle on level ground, turn off the engine, and set the parking brake. Push down at one corner of the vehicle and release it while observing the movement of the body. It should stop moving and come to rest in a level position within one or two bounces. If the vehicle continues to move up and down or fails to return to its original position, this may indicate worn or weak shock absorbers.

With the mounting fasteners in place, carefully raise the axle so that the mark on the shock lines up with the dust sleeve. Tighten the mounting fasteners to the torque specified in the vehicle's specifications.

Yes, complete strut assemblies may be available on an exchange basis. This option can save time and effort as the entire assembly can be replaced instead of disassembling and reassembling individual components.