×
Contact Us Live Chat or 1-888-788-9341
My Garage
My Account
Cart
Search Bar
Search by Part Number, Part Name, or Vehicle
Track Order Help Center
Make sure this part fits

Ford Mirrors - Auto - dimming with Homelink, Compass and Temperature Display

Ford Part No.: 4L3Z-17700-B
Customer Questions & Expert Answers (31)
Ford Mirrors - Auto - dimming with Homelink, Compass and Temperature Display 4L3Z-17700-B
Ford Mirrors - Auto - dimming with Homelink, Compass and Temperature Display 4L3Z-17700-B
  • Fusion - For base model with a manual day/night mirror only.
  • Ease the discomfort of headlamp glare: This mirror automatically dims when glare is detected.
  • It comes with a built-in compass and exterior temperature display.
  • The HomeLink function has a wireless control feature that allows you to activate home lighting, open garage doors, disarm security systems and communicate with any radio-frequency-controlled home device all from the comfort of your vehicle.
  • Dealer installation recommended.
  • Some restrictions may apply.
  • Not applicable on vehicles equipped with Ford SYNC or the factory-installed, interior compass mirror.
Manufacturer's Notes: This part is discontinued. It is no longer available for purchase.
Make sure this part fits
  • Warranty
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Warning: California’s Proposition 65

  • Warranty

    This genuine Ford part is guaranteed by Ford's factory warranty.

  • Vehicle Fitment

    Make Model Year Submodel
    MercuryGrand Marquis2009
    MercuryMariner2011Gas
    MercuryMariner2010Gas, Hybrid
    MercuryMariner2009Gas, Hybrid
    MercuryMilan2011
    MercuryMilan2010
    MercuryMilan2009
    MercuryMountaineer2010
    MercuryMountaineer2009
    MercurySable2009

  • Customer Questions & Expert Answers

    Q:
    Is the the correct part for the attached VIN? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4L3Z-17700-B fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What should you do to detach the adjustment lever on manual mirrors for the 2001 Ford Focus? Posted by Customer
    A:
    Turn the rubber boot to disengage it from the bezel.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    How do you install the exterior mirror on the 2017 Ford Fusion? Posted by Customer
    A:
    Installation is the reverse of removal. Note: There are six different types of rear view mirrors available.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    How can troubleshooting be performed on the SJB or BCM for the 2016 Ford Fusion? Posted by Customer
    A:
    Troubleshooting the SJB or BCM can be performed accurately and simply, but only with a professional-grade scan tool.
    Posted by FordPartsGiant Specialist
    Q:
    How do you install the mirror after removal for the 2005 Ford Focus? Posted by Customer
    A:
    Installation is the reverse of removal.
    Posted by FordPartsGiant Specialist
    Q:
    What should you check if the mirrors don't operate and no sound comes from them for the 2004 Ford Ranger? Posted by Customer
    A:
    Check the mirror fuse in the fuse block.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    What does the control switch do in an electric rear view mirror system for the 2007 Ford Mustang? Posted by Customer
    A:
    The control switch has a selector portion that sends voltage to the left or right side mirror.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    What is the first step in removing the mirror trim cover for the 2006 Ford Mustang? Posted by Customer
    A:
    The first step is to detach the side view mirror trim cover by pulling straight out. If equipped, disconnect the electrical connector.
    Posted by FordPartsGiant Specialist
    Q:
    How do the electric rear view mirrors adjust the glass for the 1994 Ford Ranger? Posted by Customer
    A:
    The electric rear view mirrors use two motors to move the glass; one for up and down adjustments and one for left-right adjustments.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done if access to the mirror mounting nuts is needed for the 2009 Ford Ranger? Posted by Customer
    A:
    Lower the window for access to the mirror mounting nuts, where necessary.
    Posted by FordPartsGiant Specialist
    Q:
    What is the procedure to remove the mirror for the 2011 Ford Ranger? Posted by Customer
    A:
    Remove the mounting nuts and remove the mirror (Remove the fasteners to detach the mirror).
    Posted by FordPartsGiant Specialist
    Q:
    What is the first step in the process for the 2003 Lincoln Navigator? Posted by Customer
    A:
    Remove the door trim panel and the plastic watershield.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    What is the next step after disconnecting the electrical connector from the mirror for the 2013 Lincoln MKX? Posted by Customer
    A:
    Remove the mirror mounting nuts and remove the mirror.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    How do you remove the mirror after disconnecting the electrical connectors for the 2012 Ford Taurus? Posted by Customer
    A:
    Remove the mirror mounting fasteners (Mirror electrical connector and mounting nuts) and remove the mirror.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    What does it indicate if the motors can be heard but the mirror glass doesn't move for the 2006 Lincoln Navigator? Posted by Customer
    A:
    If the motors can be heard but the mirror glass doesn't move, there's probably a problem with the drive mechanism inside the mirror. You should remove and disassemble the mirror to locate the problem.
    Posted by FordPartsGiant Specialist
    Q:
    What is the first step in removing an electric mirror for the 2004 Mercury Grand Marquis? Posted by Customer
    A:
    Disconnect the cable from the negative battery terminal.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    What should you do if the fuse is OK but the mirrors still don't operate for the 1996 Mercury Grand Marquis? Posted by Customer
    A:
    Remove the mirror control switch from its mounting without disconnecting the wires attached to it. Turn the ignition ON and check for voltage at the switch. There should be voltage at one terminal. If there's no voltage at the switch, check for an open or short in the wiring between the fuse panel and the switch.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done if there's voltage in the wires at the mirror for the 2009 Mercury Mariner? Posted by Customer
    A:
    If there's voltage, remove the mirror and test it off the vehicle with jumper wires.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    Should the compass module be removed for the 2005 Mercury Mariner? Posted by Customer
    A:
    Only if it is equipped.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    How do you install the new cable/mirror assembly for a cable-operated mirror for the 2010 Ford Crown Victoria? Posted by Customer
    A:
    Attach the string or wire to the control end of the new cable/mirror assembly, pull it into position in the vehicle, then install the mirror and screws.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    What should you do if there's voltage at the switch for the 2008 Ford Crown Victoria? Posted by Customer
    A:
    Disconnect the switch and check it for continuity in all its operating positions. If the switch does not have continuity, replace it.
    Posted by FordPartsGiant Specialist
    Q:
    How should the mirror be installed after removal for the 2012 Ford Edge? Posted by Customer
    A:
    Installation is the reverse of removal.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    What should you do after accessing the mirror retaining nuts for the 2004 Ford Excursion? Posted by Customer
    A:
    Remove the mirror retaining nuts and detach the mirror from the vehicle.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    How should the mirror be installed for the 2005 Ford Escape? Posted by Customer
    A:
    Insert the mirror into the bracket, pushing downward until it is secured.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    What should you do if the fuse is OK but the mirrors still do not operate for the 2004 Ford Excursion? Posted by Customer
    A:
    Remove the mirror control switch and have the switch continuity checked by a dealership service department or other qualified automobile repair facility.
    Posted by FordPartsGiant Specialist
    Q:
    What should you listen for while testing the mirror functions for the 2005 Ford Escape? Posted by Customer
    A:
    Listen carefully for the sound of the electric motors running in the mirrors.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    How should the mirror be removed from the 2009 Ford Expedition? Posted by Customer
    A:
    Peel back the insulator pad, then detach the mirror retaining nuts and remove the mirror from the vehicle.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    What should you check if the mirrors don't operate and no sound comes from them for the 2004 Ford Expedition? Posted by Customer
    A:
    Check the fuse.
    Posted by FordPartsGiant Specialist
    Q:
    What should you do to test the mirror control switch for the 2010 Ford F-150? Posted by Customer
    A:
    With the ignition ON but the engine OFF, roll down the windows and operate the mirror control switch through all functions (left-right and up-down) for both the left and right side mirrors.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    Q:
    What is the final step after removing the mirror for the 2012 Ford F-150? Posted by Customer
    A:
    Installation is the reverse of removal.
    Posted by FordPartsGiant Specialist
    Q:
    What is the final step in the process for the 2002 Ford Explorer Sport Trac? Posted by Customer
    A:
    Installation is the reverse of removal.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Mirror
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Accessory 4L3Z-17700-B, the Right Choice

Your vehicle deserves only genuine OEM Ford parts and accessories. To ensure reliability, purchase Ford part # 4L3Z-17700-B Mirrors - Auto - dimming with Homelink, Compass and Temperature Display. Our Ford parts and accessories are expedited directly from authorized Ford dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM Ford parts are the best for restoring your vehicle to factory condition performance. This part fits specific Mercury Grand Marquis, Mountaineer, Sable models.

Affordable, reliable and built to last, Ford part # 4L3Z17700B Mirrors - Auto - dimming with Homelink, Compass and Temperature Display stands out as the smart option. FordPartsGiant.com is your prime online source with the biggest and best selection of genuine Ford parts and accessories at giant discounted prices. We have the OEM Ford parts and accessories you need at the wholesale prices. FordPartsGiant.com has you covered no matter what type of Ford vehicle you drive.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly