Make sure this part fits

Ford 1L5Z-6675-BA Pan Assembly - Engine Oil

2001-2011 Ford Ranger 1L5Z6675BA

Customer Questions & Expert Answers (11)
Ford 1L5Z-6675-BA Pan Assembly - Engine Oil
  • Part Description
    Pan Assy - Engine Oil
  • Base No.
    6675
  • Manufacturer
    Ford
Make sure this part fits
$115.14 MSRP: $168.33
You Save: $53.19 (32%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.6675
    Manufacturer Part Number1L5Z-6675-BA, 1L5Z6675BA
    Part DescriptionPan Assy - Engine Oil
    Other NamesOil Pan
    Manufacturer NoteReplacment pan does not require baffle per engineering.
    Item Dimensions6.8 x 21.6 x 13.3 inches
    Item Weight10.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKU1L5Z-6675-BA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2001-2011 Ford Ranger4 Cyl 2.3L, 4 Cyl 2.3L NA Petrol4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT, 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
  • Customer Questions & Expert Answers

    Q:
    Does the PN fit my vehicle? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 1L5Z-6675-BA fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done after draining the oil for the 2011 Ford Ranger? Posted by Customer
    A:
    After draining the oil, you should remove the engine oil dipstick, dipstick tube mounting bolts, and the tube itself (if it was not removed during engine removal).
    Posted by FordPartsGiant Specialist
    Q:
    What should be installed after the bolts are torqued for the 2000 Ford Ranger? Posted by Customer
    A:
    Install the dipstick tube and dipstick (unless removal is necessary for engine installation). Note: Use clean engine oil on the ring gasket on the tube before installation.
    Posted by FordPartsGiant Specialist
    Q:
    What is the final step in the process for the 1999 Ford Ranger? Posted by Customer
    A:
    Run the engine and check for leaks.
    Posted by FordPartsGiant Specialist
    Q:
    How should the oil pan-to-transmission bolts be tightened initially for the 2005 Ford Ranger? Posted by Customer
    A:
    Tighten the two oil pan-to-transmission bolts to the torque, then loosen them 1/2 turn.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done after completing the installation for the 2001 Ford Ranger? Posted by Customer
    A:
    Be sure to refill the engine with the proper quantity and grade of oil.
    Posted by FordPartsGiant Specialist
    Q:
    What is the final step after reinstalling parts for the 2003 Ford Ranger? Posted by Customer
    A:
    Refill with engine oil and run the engine to check for leaks.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    What is the next step after checking the clearance for the 2003 Ford Ranger? Posted by Customer
    A:
    Tighten the perimeter bolts/nuts, including the two rear lower block cradle-to-transmission bolts and the two rear lower block cradle-to-engine block bolts, to the specified torque.
    Posted by FordPartsGiant Specialist
    Q:
    Where should RTV sealant be applied for the 2004 Ford Ranger? Posted by Customer
    A:
    At the rear of the engine, apply a thin bead of RTV sealant to the outside edge of the gasket surface and around the crankshaft rear oil seal. At the front of the engine, apply a bead of sealant to each of the engine block-to-timing-chain cover seams and to the corners of the front seal cover.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done after removing the center bolts of the reinforcement section for the 1995 Ford Ranger? Posted by Customer
    A:
    Remove the two rear reinforcement section-to-block bolts, then the outside bolts on each side.
    Posted by FordPartsGiant Specialist
    Q:
    What is the final step in the installation process for the 1999 Ford Ranger? Posted by Customer
    A:
    Install the spacers on the mounting pads before bolting the engine to the transmission.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 1L5Z-6675-BA, the Right Choice

To ensure reliability, purchase Ford part # 1L5Z-6675-BA Pan Assembly - Engine Oil. It is sometimes referred to as Ford Oil Pan. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford Ranger models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford 1L5Z6675BA Pan Assembly - Engine Oil. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly