Ford F57Z-6108-A Piston And Pin Assembly

You can Select Your Vehicle to check if F57Z-6108-A fits your vehicle.

After the cylinder ridges have been removed, turn the engine upside-down so the crankshaft is facing up.

If the pistons must be removed from the connecting rods for any reason, they should be taken to an automotive machine shop. While they are there, have the connecting rods checked for bend and twist, since automotive machine shops have special equipment for this purpose. Note: Unless new pistons or connecting rods must be installed, do not disassemble the pistons and connecting rods.

Remove the cap from the end of the number one connecting rod, remove the original bearing inserts, and wipe the bearing surfaces of the connecting rod and cap with a clean, lint-free cloth. They must be kept spotlessly clean.