Ford XL2Z-6B321-AA Crankshaft Pulley

You can Select Your Vehicle to check if XL2Z-6B321-AA fits your vehicle.

The remainder of the installation is the reverse of the removal procedure.

1. Drain the cooling system. 2. Remove the engine cooling fan and radiator. 3. Detach the air conditioning compressor and bracket (if equipped) and set them aside. DO NOT disconnect any refrigerant lines! 4. Remove the oil pan. 5. Remove the water pump. 6. Remove the heater and radiator hoses as needed to provide removal access for the timing chain cover. 7. Remove the brackets, studs, and cover bolts. Note: The bolts are different lengths, and bolts and studs go in different locations. Label them so they can be installed in the correct location. 8. Take the cover off. If it's stuck, tap it lightly with a soft-face hammer or pry it carefully to break the gasket seal. Don't use excessive force or you'll crack the cover. If it's difficult to remove, check to make sure you've removed all the bolts.