Ford CR3Z-18124-B Shock Absorber Assembly

You can Select Your Vehicle to check if CR3Z-18124-B fits your vehicle.

When disassembling the strut assembly, the upper bearing assembly should be inspected for smooth operation. Any signs of it not turning smoothly or cracking and deterioration in the rubber portion may indicate the need for replacement.

Remove the wheels and place a floor jack under the lower control arm.

To check the shock absorbers, park the vehicle on level ground, turn off the engine, and set the parking brake. Push down at one corner of the vehicle and release it while observing the movement of the body. It should stop moving and come to rest in a level position within one or two bounces. If the vehicle continues to move up and down or fails to return to its original position, this may indicate worn or weak shock absorbers.

To raise the vehicle, place it on the ground and at normal ride height, then mark the shock absorbers in relation to the dust sleeve. Next, raise the rear of the vehicle and support it securely on jackstands placed under the frame, avoiding support under the differential housing or axle.