Ford GU2Z-18A092-AX Strut - Loaded Assembly

You can Select Your Vehicle to check if GU2Z-18A092-AX fits your vehicle.

The first step is to disconnect the brake hose from the bracket on the strut by unclipping the brake hose from the strut.

If the front suspension struts exhibit signs of wear (such as leaking fluid, loss of damping capability, sagging, or cracked coil springs), they should be disassembled and overhauled as necessary. The struts themselves cannot be serviced and should be replaced if faulty; however, the springs and related components can be replaced individually. To maintain balanced characteristics on both sides of the vehicle, the components on both sides should be replaced at the same time.

Address loose steering gear mounts or worn tie-rod ends.

5. Chock the front wheels, jack up the rear of the vehicle, and support it on axle stands. Remove the wheels as required. 6. On the left-hand shock absorber, release the exhaust from the rubber hanger, then undo the rear exhaust muffler heat shield bolts and remove it to access the upper shock mounting nut. 7. Place a jack under the lower suspension arm/coil spring for support. Unscrew and remove the upper mounting bolt, then the lower mounting bolt. Withdraw the shock absorber from under the vehicle.