Ford 1S4Z-18124-BA Strut - Suspension

You can Select Your Vehicle to check if 1S4Z-18124-BA fits your vehicle.

After the strut assembly is completely disassembled, all components should be examined for wear and damage, and the bearing should be checked for smoothness of operation. Components should be replaced as necessary.

5. Chock the front wheels, jack up the rear of the vehicle, and support it on axle stands. Remove the wheels as required. 6. On the left-hand shock absorber, release the exhaust from the rubber hanger, then undo the rear exhaust muffler heat shield bolts and remove it to access the upper shock mounting nut. 7. Place a jack under the lower suspension arm/coil spring for support. Unscrew and remove the upper mounting bolt, then the lower mounting bolt. Withdraw the shock absorber from under the vehicle.

The next step is to support the strut spring assembly under the fenderwell, then remove the upper mounting nuts, which involves removing the three upper mounting nuts.

Replace the balljoints.