Ford AE5Z-8620-A V-Belt

You can Select Your Vehicle to check if AE5Z-8620-A fits your vehicle.

To check the serpentine drivebelt, you need to raise the front of the vehicle, remove the right-hand wheel and fenderwell splash shield, and securely support the vehicle on jackstands. With the engine off, inspect the belt for cracks, separation, fraying, and glazing, and check pulleys for damage. Small cracks in ribbed belts are acceptable unless extensive or deep.

To check the belt, you can raise the front of the vehicle, remove the right-hand wheel, and unbolt the lower splash shield. Then, inspect the entire belt length for cracks, separation, fraying, and glazing, while also checking the pulleys for nicks, cracks, and corrosion.

To replace the belt, you need to loosen the right front wheel lug nuts, raise the vehicle, and remove the wheel and lower splash shield. Then, observe the belt routing and use appropriate tools to release tension. Finally, install the new belt correctly and reassemble the components.