Make sure this part fits

Lincoln D8FZ-6564-A Arm Assembly - Valve Rocker

1980-1989 Lincoln D8FZ6564A

Customer Questions & Expert Answers (10)
Ford D8FZ-6564-A Arm Assembly - Valve Rocker
  • Part Description
    Arm Assy - Valve Rocker
  • Base No.
    6564
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Lincoln
    Base No.6564
    Manufacturer Part NumberD8FZ-6564-A, D8FZ6564A
    Part DescriptionArm Assy - Valve Rocker
    Other NamesRocker Arm
    Item Dimensions7.3 x 5.3 x 4.0 inches
    Item Weight0.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity8
    ManufacturerFord
    SKUD8FZ-6564-A
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1982-1989 Lincoln Continental6 Cyl 2.4L, 6 Cyl 3.8L, 8 Cyl 5.0L4AT, 4AT AOD, 4AT AXOD
    1980-1983 Lincoln Mark VI8 Cyl 5.0L, 8 Cyl 5.8L4AT AOD
    1984-1989 Lincoln Mark VII6 Cyl 2.4L, 8 Cyl 5.0L4AT, 4AT AOD
    1982-1989 Lincoln Town Car8 Cyl 5.0L4AT AOD
  • Customer Questions & Expert Answers

    Q:
    I am wondering if this is the exact part that fits in Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if D8FZ-6564-A fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What should be inspected on the rocker arm pivot areas and fulcrums for the 1992 Lincoln Mark VII? Posted by Customer
    A:
    Inspect them for wear and damage.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Rocker Arm
    Q:
    What should be applied to the fulcrums before installing them with bolts for the 1985 Lincoln Continental? Posted by Customer
    A:
    Apply moly-base grease to prevent damage to mating surfaces.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Rocker Arm
    Q:
    How can valve adjustment be done on positive stop rocker arms for the 1982 Lincoln Town Car? Posted by Customer
    A:
    Use a lifter bleed-down tool to press on the rocker arm until the lifter leaks down, then check the clearance between the valve stem and rocker arm with a feeler gauge.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Rocker Arm
    Q:
    How should the rocker arm shaft support bolts be loosened for the 1984 Mercury Capri? Posted by Customer
    A:
    Loosen the rocker arm shaft support bolts two turns at a time, working from the center out, until the bolts can be removed by hand.
    Posted by FordPartsGiant Specialist
    Q:
    How should you lubricate the lower end of each pushrod before installation for the 1989 Ford Thunderbird? Posted by Customer
    A:
    Lubricate the lower end of each pushrod with clean engine oil or moly-base grease and install them in their original locations. Make sure each pushrod seats completely in the lifter.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Rocker Arm
    Q:
    How should you prevent damage to the mating surfaces before engine oil pressure builds up for the 1990 Mercury Cougar? Posted by Customer
    A:
    Apply moly-base grease to the fulcrums to prevent damage to the mating surfaces before engine oil pressure builds up. Set the rocker arms and guides in place, then install the fulcrums and bolts. Note: Adjustment is normally only needed when valve train components have been replaced or valves have been ground a considerable amount.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Rocker Arm
    Q:
    What should be installed after the cover for the 1980 Mercury Capri? Posted by Customer
    A:
    Install the accelerator cable bracket.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Rocker Arm
    Q:
    Which valves should be checked at position 3 for the 1985 Mercury Capri? Posted by Customer
    A:
    Intake - no. 2, 5, and 6; Exhaust - no. 4, 5, and 8.
    Posted by FordPartsGiant Specialist
    Q:
    How should the lower end of each pushrod be lubricated and installed for the 2003 Mercury Grand Marquis? Posted by Customer
    A:
    Lubricate the lower end of each pushrod with clean engine oil or moly-base grease and install them in their original locations. Make sure each pushrod seats completely in the lifter.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Rocker Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part D8FZ-6564-A, the Right Choice

To ensure reliability, purchase Ford part # D8FZ-6564-A Arm Assembly - Valve Rocker. It is sometimes referred to as Lincoln Rocker Arm. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Lincoln Continental, Mark VI, Mark VII models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford D8FZ6564A Arm Assembly - Valve Rocker. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Lincoln parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly