Lincoln XL3Z-13466-AA Bulb

You can Select Your Vehicle to check if XL3Z-13466-AA fits your vehicle.

First of all, ensure that the ignition and headlight switches are turned off. Next, raise the hood. After that, unplug the electrical connector from the headlight assembly for earlier models like 2007. Then remove the rubber boot and bulb retainer spring. Remove the bulb without touching its glass part. Insert a new bulb ensuring that its metal tabs align with the plastic base. Push the bulb till it is fully seated into position. Reattach the rubber book and spring back onto their previous positions. Now plug in the connector again. Close up by testing headlights and closing the hood again, for model years 2008 as well as subsequent versions repeat the above steps but twist counterclockwise then pull out the bulb after testing headlights close up by closing the hood again.

Plug in the electrical connector.

Remove the assembly by taking out the mounting screws and washers, disconnect the electrical connector, and place the assembly on a workbench. Separate the bulb holder assembly from the lens and replace the bulb by pulling it straight out and pushing the new one in. Reassemble and use new mounting screws and washers if recommended by the manufacturer.

Slide the side light housing rearward, pull it out, disconnect the wiring, and reinstall it in reverse.