Make sure this part fits

Lincoln 6S4Z-6250-BA Camshaft

2010-2012 Lincoln MKZ 6S4Z6250BA

Customer Questions & Expert Answers (23)
Ford 6S4Z-6250-BA Camshaft
  • Part Description
    Camshaft
  • Replaced By
    DN1Z-6250-A
  • Manufacturer
    Ford
Make sure this part fits
$41.76 MSRP: $60.00
You Save: $18.24 (31%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Lincoln
    Manufacturer Part Number6S4Z-6250-BA, 6S4Z6250BA
    Part DescriptionCamshaft
    Manufacturer NoteExhaust
    Item Weight4.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKU6S4Z-6250-BA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2010-2012 Lincoln MKZ4 Cyl 2.5L PFI Gas/Electric5-Speed Automatic Transmission Mazda FNR5, 5-Speed Manual Transmission (G5M), 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Manual Transmission Mazda G6M, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
  • Customer Questions & Expert Answers

    Q:
    Can you tell me if this part is correct for my car? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 6S4Z-6250-BA fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What should be visually examined on the camshaft lobes for the 2008 Ford Focus? Posted by Customer
    A:
    Look for score marks, pitting, galling, evidence of overheating, and flaking away of the hardened surface layer. Replace any components showing such signs.
    Posted by FordPartsGiant Specialist
    Q:
    What is the procedure for tightening the camshaft bearing cap bolts for the 2011 Ford Focus? Posted by Customer
    A:
    Ensure each cap is kept square to the cylinder head as it is tightened down, and working in sequence, tighten the bolts slowly and by one turn at a time until each cap touches the cylinder head.
    Posted by FordPartsGiant Specialist
    Q:
    How should the components be organized during removal for the 2011 Ford Focus? Posted by Customer
    A:
    Keep the components in their originally installed sequence by marking them with a piece of numbered tape or using a suitable sub-divided box (such as an egg carton).
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be checked on the 2020 Ford Fusion before installing the valve cover? Posted by Customer
    A:
    Check the valve clearance.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the camshaft bearing cap bolts be loosened for the 1995 Ford Ranger? Posted by Customer
    A:
    Loosen the camshaft bearing cap bolts progressively by half a turn at a time in the provided sequence only. Gradually and evenly release the pressure of the valve springs on the caps.
    Posted by FordPartsGiant Specialist
    Q:
    What should be inspected after removing the camshaft from the engine for the 2002 Ford Ranger? Posted by Customer
    A:
    Inspect the bearing journals for uneven wear, pitting, and evidence of seizure. If the journals are damaged, the bearing inserts are likely damaged as well, and both the camshaft and bearings will need to be replaced.
    Posted by FordPartsGiant Specialist
    Q:
    How should the camshaft bearing cap bolts be loosened for the 2005 Ford Ranger? Posted by Customer
    A:
    Loosen the bolts progressively by half a turn at a time in the provided sequence, gradually and evenly releasing the pressure of the valve springs on the caps.
    Posted by FordPartsGiant Specialist
    Q:
    What is a crucial note before starting the removal procedure for the 2011 Ford Ranger? Posted by Customer
    A:
    This procedure requires the engine be removed from the vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    When can the camshaft be reused for the 1993 Ford Ranger? Posted by Customer
    A:
    If the lobes are in good condition and if the lobe lift measurements are as specified, the camshaft can be reused.
    Posted by FordPartsGiant Specialist
    Q:
    What should be checked on the camshaft lobes for the 2011 Ford Ranger? Posted by Customer
    A:
    Check the camshaft lobes for heat discoloration, score marks, chipped areas, pitting, and uneven wear. If the lobes are in good condition, the camshaft can be reused.
    Posted by FordPartsGiant Specialist
    Q:
    How is camshaft endplay checked for the 2016 Ford Fusion? Posted by Customer
    A:
    Clean the bearing surfaces, install the camshafts and bearing caps, tighten the bearing cap bolts to the specified torque, then measure the endplay using a dial indicator.
    Posted by FordPartsGiant Specialist
    Q:
    How should the Plastigage be removed for the 2002 Ford Ranger? Posted by Customer
    A:
    Scrape off the Plastigage with your fingernail or the edge of a credit card, being careful not to scratch or nick the journals or bearing surfaces.
    Posted by FordPartsGiant Specialist
    Q:
    What is the procedure for measuring the maximum cam lobe lift for the 2010 Ford Ranger? Posted by Customer
    A:
    Zero the dial indicator, then slowly turn the crankshaft in the normal direction of rotation until the indicator needle stops and begins to move in the opposite direction. The point at which it stops indicates maximum cam lobe lift.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done with the camshaft seal for the 2004 Ford Ranger? Posted by Customer
    A:
    Remove the camshaft seal and withdraw the camshaft, being careful not to damage the camshaft bearings and journals.
    Posted by FordPartsGiant Specialist
    Q:
    What should you apply to the camshaft lobes and bearing journals before installation for the 2002 Ford Ranger? Posted by Customer
    A:
    Apply moly-based engine assembly lubricant to the camshaft lobes and bearing journals, then install the camshaft(s).
    Posted by FordPartsGiant Specialist
    Q:
    What is the next step after unbolting the camshaft sprocket for the 2003 Ford Ranger? Posted by Customer
    A:
    Remove the timing chain and sprockets.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the thrust plate be checked for wear for the 2006 Ford Ranger? Posted by Customer
    A:
    Install the camshaft in the cylinder head and position the thrust plate at the rear. Using a dial indicator, check the total endplay by prying the camshaft carefully back-and-forth. If the endplay is outside the limit specified, replace the thrust plate with a new one.
    Posted by FordPartsGiant Specialist
    Q:
    Is it recommended to install new camshaft oil seals for the 2005 Mercury Mariner? Posted by Customer
    A:
    Yes, it is highly recommended to install new camshaft oil seals after the caps are tightened.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step in installing the camshafts for the 2007 Mercury Mariner? Posted by Customer
    A:
    Make sure the crankshaft keyway is at the 11 o'clock position.
    Posted by FordPartsGiant Specialist
    Q:
    What should be checked regarding the locating dowels during installation for the 2005 Ford Escape? Posted by Customer
    A:
    Ensure that the locating dowels are pressed firmly into their recesses and that all mating surfaces are clean and free from oil.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be removed after the valve lifters for the 2010 Ford Ranger? Posted by Customer
    A:
    Remove the timing chain cover.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done with the hydraulic lash adjusters for the 2006 Ford Escape? Posted by Customer
    A:
    Lift the hydraulic lash adjusters from their bores in the cylinder head. Identify and separate the adjusters so they can be reinstalled in their original locations.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 6S4Z-6250-BA, the Right Choice

To ensure reliability, purchase Ford part # 6S4Z-6250-BA Camshaft. It is sometimes referred to as Lincoln Camshaft. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Lincoln MKZ models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford 6S4Z6250BA Camshaft. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Lincoln parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly