Lincoln F6DZ-17508-AA Motor Assembly - Wiper

You can Select Your Vehicle to check if F6DZ-17508-AA fits your vehicle.

A trim removal tool or a similar suitable tool can be used to pry off each linkage arm from the pin on the end of the motor crank arm.

Ensure the battery is in good condition and has a strong charge. If the battery is fine, remove the wiper motor and operate the wiper arms by hand to check for binding linkage and pivots. Lubricate or repair as necessary, then reinstall the wiper motor. If the wipers still operate slowly, check for loose or corroded connections, especially the ground connection. If all connections look OK, replace the motor.

First, check the fuse. If the fuse is OK, connect a jumper wire between the wiper motor and ground, then retest. If the motor works now, repair the ground connection. If it still doesn't work, turn the wiper switch to the HI position and check for voltage at the motor. If there's voltage, remove the motor and check it off the vehicle with fused jumper wires from the battery. If it works, check for binding linkage. If it still doesn't work, replace it. If there's no voltage at the motor, check for voltage at the wiper control module. If there's voltage at the module and none at the motor, check the switch for continuity. If the switch is OK, the wiper control module is likely bad.