Lincoln FOLY-17255-B Speedometer Assembly

You can Select Your Vehicle to check if FOLY-17255-B fits your vehicle.

Disconnect the cable from the negative battery terminal. Remove the instrument cluster bezel. Detach the shift indicator assembly from the cluster by removing the screw and disconnecting the wire loop from the pin on the column shift indicator. Remove the instrument cluster retaining screws. Reach behind the cluster housing and press on the release lever to disconnect the speedometer cable. You can also reach behind the cluster and press the tab to release the speedometer cable or disconnect the electronic speed sensor. Pull the cluster out and disconnect the electrical connectors. Remove the cluster from the instrument panel. On early models, rotate the bezel out of the opening. On later models, tilt the top of the bezel toward you, then pull it straight out. Installation is the reverse of removal.

Instrument panel removal on most later model vehicles is a complicated and tedious job, and it's suggested that only an experienced mechanic should tackle this job to avoid complications.