Make sure this part fits

Lincoln F6TZ-9D475-E Valve - Exhaust Gas

1998-2002 Lincoln Navigator F6TZ9D475E

Customer Questions & Expert Answers (13)
Ford F6TZ-9D475-E Valve - Exhaust Gas
  • Part Description
    Valve - Exhaust Gas Recirculation
  • Base No.
    9D475
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
$0.00Currently Unavailable

Due to manufacturer supply shortage, this item isn’t currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Lincoln
    Base No.9D475
    Manufacturer Part NumberF6TZ-9D475-E, F6TZ9D475E
    Part DescriptionValve - Exhaust Gas Recirculation
    Other NamesEGR Valve
    Item Dimensions5.2 x 4.2 x 4.6 inches
    Item Weight1.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKUF6TZ-9D475-E
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1998-2002 Lincoln Navigator8 Cyl 5.4L4AT 4R100, 4AT E4OD
  • Customer Questions & Expert Answers

    Q:
    Is the the correct part for the attached VIN? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if F6TZ-9D475-E fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How can you replace the air supply pump on MTA systems for the 1989 Ford Bronco? Posted by Customer
    A:
    To replace the air supply pump on MTA systems, loosen drivebelts, remove the faulty pump, label hoses, install the new pump, and adjust drivebelts.
    Posted by FordPartsGiant Specialist
    See expert answers on similar EGR Valve
    Q:
    What are the steps for replacing the EGR valve for the 2001 Ford Excursion? Posted by Customer
    A:
    To replace the EGR valve, follow these steps:Turn the ignition OFF.Remove the air filter housing.Disconnect the EGR valve connector and vacuum hose.Detach the EGR pipe.Remove the EGR valve retainer bolts.Clean the EGR valve gasket surface if reusing.
    Posted by FordPartsGiant Specialist
    See expert answers on similar EGR Valve
    Q:
    How does the ported vacuum valve operate in the emission control system for the 1992 Ford Bronco? Posted by Customer
    A:
    The ported vacuum valve operates based on ported vacuum and provides an ideal signal for EGR during part-throttle and cruise conditions.
    Posted by FordPartsGiant Specialist
    See expert answers on similar EGR Valve
    Q:
    What is the main objective of adjusting air/fuel ratios in cruise mode for the 1983 Ford Bronco? Posted by Customer
    A:
    The main objective is to improve gas mileage.
    Posted by FordPartsGiant Specialist
    See expert answers on similar EGR Valve
    Q:
    Are there any additional checks that can be performed in fuel-injected systems for the 1987 Ford F-250? Posted by Customer
    A:
    Yes, in fuel-injected systems, additional checks include evaluating the Exhaust Valve Regulator (EVR) solenoid and examining the Exhaust Valve Position (EVP) sensor circuit.
    Posted by FordPartsGiant Specialist
    See expert answers on similar EGR Valve
    Q:
    How is the flow rate of the EGR determined, and what is the role of the DPFE (Differential Pressure Feedback) system for the 2007 Ford Expedition? Posted by Customer
    A:
    The flow rate of the EGR is determined by the DPFE system, which monitors the pressure across a metering orifice. The DPFE system is more accurate than previous systems as it can account for changes in exhaust back pressure.
    Posted by FordPartsGiant Specialist
    See expert answers on similar EGR Valve
    Q:
    How do you perform replacements of other components related to the air inlet control, deceleration throttle control, intake manifold heating, PCV system, and catalytic converter for the 1989 Ford F-250? Posted by Customer
    A:
    Replacements of other components related to the air inlet control, deceleration throttle control, intake manifold heating, PCV system, and catalytic converter typically involve disconnecting wires and hoses, removing faulty components, and installing new ones as needed.
    Posted by FordPartsGiant Specialist
    See expert answers on similar EGR Valve
    Q:
    What issues can arise from excessive or insufficient EGR flow, and how might these issues manifest in engine performance for the 1999 Ford Explorer? Posted by Customer
    A:
    Excessive EGR flow can lead to rough engine operation, surging, or stalling, while insufficient flow results in elevated combustion temperatures and potential issues such as spark knock or engine overheating.
    Posted by FordPartsGiant Specialist
    See expert answers on similar EGR Valve
    Q:
    How do you replace the EGR tube for the 2000 Ford Ranger? Posted by Customer
    A:
    To replace the EGR tube, you need to follow these steps:1. Remove the EGR valve.2. Disconnect the tube fittings.3. Installation is the reverse of removal.
    Posted by FordPartsGiant Specialist
    See expert answers on similar EGR Valve
    Q:
    How does the Exhaust Gas Recirculation (EGR) system address the issue of NOx production during lean cruise modes for the 1986 Ford F-250? Posted by Customer
    A:
    The EGR system reintroduces small metered amounts of exhaust gas back into the intake manifold during part throttle and cruise conditions, where it combines with the air/fuel mixture before combustion, lowering combustion temperatures and reducing NOx emissions.
    Posted by FordPartsGiant Specialist
    See expert answers on similar EGR Valve
    Q:
    What are the components of the EGR system for the 2005 Lincoln Navigator? Posted by Customer
    A:
    The EGR system consists of components such as the EGR valve, EGR vacuum regulator, differential feedback pressure sensor, PCM (Powertrain Control Module), EGR pipe, and vacuum and pressure lines.
    Posted by FordPartsGiant Specialist
    See expert answers on similar EGR Valve
    Q:
    How do you replace the EGR Vacuum Regulator Solenoid (if equipped) for the 1996 Ford Ranger? Posted by Customer
    A:
    To replace the EGR Vacuum Regulator Solenoid, follow these steps: a) Disconnect the battery. b) Disconnect electrical and vacuum connections. c) Remove securing nuts. d) Reinstall in reverse order.
    Posted by FordPartsGiant Specialist
    See expert answers on similar EGR Valve
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part F6TZ-9D475-E, the Right Choice

Your vehicle deserves only genuine OEM Ford parts and accessories. To ensure reliability, purchase Ford part # F6TZ-9D475-E Valve - Exhaust Gas with base parts number 9D475. It is sometimes referred to as Lincoln EGR Valve. Our Ford parts and accessories are expedited directly from authorized Ford dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM Ford parts are the best for restoring your vehicle to factory condition performance. This part fits specific Lincoln Navigator models.

Affordable, reliable and built to last, Ford part # F6TZ9D475E Valve - Exhaust Gas stands out as the smart option. FordPartsGiant.com is your prime online source with the biggest and best selection of genuine Ford parts and accessories at giant discounted prices. We have the OEM Ford parts and accessories you need at the wholesale prices. FordPartsGiant.com has you covered no matter what type of Ford vehicle you drive. For detailed Lincoln parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly