×
Contact Us Live Chat or 1-888-788-9341
My Garage
My Account
Cart
Search Bar
Search by Part Number, Part Name, or Vehicle
Track Order Help Center
Make sure this part fits

Mercury 1L2Z-6250-DA Camshaft

2001-2011 Mercury 1L2Z6250DA

Customer Questions & Expert Answers (12)
Ford 1L2Z-6250-DA Camshaft
Ford 1L2Z-6250-DA Camshaft
Ford 1L2Z-6250-DA Camshaft
  • Part Description
    Camshaft
  • Base No.
    6250
  • Position
    Driver Side
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • Related Parts

    Shop for related parts for your vehicle

  • Product Specifications

    BrandGenuine Mercury
    Base No.6250
    Manufacturer Part Number1L2Z-6250-DA, 1L2Z6250DA
    Part DescriptionCamshaft
    Item Dimensions7.3 x 6.1 x 23.7 inches
    Item Weight6.10 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKU1L2Z-6250-DA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2001-2011 Mercury Grand Marquis8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI4AT 4R70W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
    2002-2005 Mercury Mountaineer8 Cyl 4.6L Romeo SOHC EFI5-Speed Automatic Transmission 5R55S, 5-Speed Automatic Transmission 5R55W, 5-Speed Manual Transmission (M5R4), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission 6R60, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Right Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

  • Customer Questions & Expert Answers

    Q:
    Does the PN fit my vehicle? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 1L2Z-6250-DA fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What components need to be removed after taking off the valve cover(s) for the 1995 Lincoln Town Car? Posted by Customer
    A:
    After removing the valve cover(s), proceed to remove the timing chains, camshaft sprockets, and spacers, taking care not to mix them up as they are marked for the right and left banks.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you check cam lobe wear for the 1985 Lincoln Town Car? Posted by Customer
    A:
    To check cam lobe wear, begin by removing the valve covers and positioning the number one piston at TDC on the compression stroke. Mount a dial indicator on the engine, align it with the first rocker arm, zero the indicator, and slowly turn the crankshaft to determine maximum cam lobe lift. Record the figures for each valve by repeating the process across cylinders. Compare the results to the specifications, and if the lift is less than specified, replace the camshaft.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is required for camshaft bearing replacement for the 1994 Mercury Grand Marquis? Posted by Customer
    A:
    Camshaft bearing replacement requires special tools and expertise, making it advisable to take the block to an automotive machine shop.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be applied to the camshaft lobes and bearing journals before installation for the 2005 Mercury Grand Marquis? Posted by Customer
    A:
    Apply moly-base grease or camshaft installation lube to the camshaft lobes and bearing journals.
    Posted by FordPartsGiant Specialist
    Q:
    What should you check on the camshaft lobes for the 2006 Ford Crown Victoria? Posted by Customer
    A:
    Check the camshaft lobes for heat discoloration, score marks, chipped areas, pitting, and uneven wear. If the lobes are in good condition and the lobe lift measurements are as specified, the camshaft can be reused.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after loosening the bearing cap cluster bolts for the 1996 Ford Crown Victoria? Posted by Customer
    A:
    Remove the two cap clusters and lift the camshaft off the cylinder head. Don't mix up the camshafts or any of the components; they must all go back in the same positions and on the same cylinder head they were removed from.
    Posted by FordPartsGiant Specialist
    Q:
    How should the diameter of each camshaft journal and the lift of each camshaft lobe be measured for the 2005 Ford Expedition? Posted by Customer
    A:
    Use a micrometer to measure the diameter of each camshaft journal and the lift of each camshaft lobe.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What must be removed before checking the cam lobe lift for the 2009 Ford Expedition? Posted by Customer
    A:
    The rocker arms must be removed, but the pushrods should remain in place.
    Posted by FordPartsGiant Specialist
    Q:
    What should be inspected after removing the camshaft for the 2006 Ford F-150? Posted by Customer
    A:
    After removing the camshaft, it should be cleaned and inspected for uneven wear, pitting, and evidence of seizure on the bearing journals. The camshaft lobes should also be inspected for heat discoloration, score marks, chipped areas, pitting, and uneven wear.
    Posted by FordPartsGiant Specialist
    Q:
    What are the steps for the 2010 Ford F-150? Posted by Customer
    A:
    9. Remove the camshaft sprockets, locking the camshaft in position with a special tool before loosening the sprocket bolt. CAUTION: Don't mix up the sprockets; make an identification mark on each sprocket using paint for correct reassembly. 10. On the right cylinder head, remove the camshaft cap bolts, loosening them only 1/4-turn at a time. 11. On the left cylinder head, repeat the process for the camshaft cap bolts. 12. Remove the caps and lift the camshaft off the cylinder head, tapping lightly if necessary. 13. Don't mix up the camshafts or any components; they must all go back in the same positions. 14. Repeat this procedure for the remaining camshaft.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be inspected on the camshaft lobes for the 2006 Ford F-150? Posted by Customer
    A:
    Inspect the camshaft lobes for heat discoloration, score marks, chipped areas, pitting, and uneven wear.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 1L2Z-6250-DA, the Right Choice

To ensure reliability, purchase Ford part # 1L2Z-6250-DA Camshaft. It is sometimes referred to as Mercury Camshaft. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Mercury Grand Marquis, Mountaineer models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford 1L2Z6250DA Camshaft. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Mercury parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly