Make sure this part fits

Mercury F3AZ-6316-A Harmonic Balancer Pulley

1992-2000 Mercury F3AZ6316A

Customer Questions & Expert Answers (7)
Ford F3AZ-6316-A Harmonic Balancer Pulley
  • Part Description
    Damper Assy
  • Base No.
    6316
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
$0.00Currently Unavailable

Due to manufacturer supply shortage, this item isn’t currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mercury
    Base No.6316
    Manufacturer Part NumberF3AZ-6316-A, F3AZ6316A
    Part DescriptionDamper Assy
    Other NamesDamper Assembly, Pulley, Vibration Damper
    Item Dimensions8.3 x 8.8 x 2.6 inches
    Item Weight6.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKUF3AZ-6316-A
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1994-1997 Mercury Cougar8 Cyl 4.6L4AT, 4AT 4R70W, 4AT AODE
    1992-2000 Mercury Grand Marquis8 Cyl 4.6L4AT, 4AT 4R70W, 4AT AOD, 4AT AODE
  • Customer Questions & Expert Answers

    Q:
    Is the the correct part for the attached VIN? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if F3AZ-6316-A fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How to remove and reinstall a vibration damper on a crankshaft on Lincoln Town Car Overhead valve (OHV)engines? Posted by Customer
    A:
    Go ahead and remove the shroud bolts of the fan, then put it over the fan. Remove the drivebelts, fan/clutch assembly, and shroud. If you are to remember only one thing about this process, it should be the mark on the vibration damper and crankshaft pulley. Then snatch off the pulley and front crankshaft bolt. Before yanking off these four pulley bolts, mark that pulley. Next, gently pull it away using a puller to separate it from the engine access hole. Once done with lubing its hub, set up this damper on its hooked position as placed on the crankshaft by gluing together a washer and bolt. Use a hammer instead if necessary to push through. Finally, your way back around to cooling system service steps before adding enough coolant for testing any possible leakages.
    Posted by FordPartsGiant Specialist
    Q:
    What caution should be taken when using a puller to remove the vibration damper for the 2007 Mercury Grand Marquis? Posted by Customer
    A:
    Don't use a puller with jaws that grip the outer edge of the damper. The puller must be the type shown in the illustration that utilizes bolts to apply force to the damper hub only.
    Posted by FordPartsGiant Specialist
    Q:
    How should the damper be installed on the crankshaft for the 1991 Lincoln Town Car? Posted by Customer
    A:
    The keyway in the damper must be aligned with the Woodruff key in the crankshaft nose.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Crankshaft Pulley
    Q:
    What should you clean with lacquer thinner or acetone for the 2000 Mercury Grand Marquis? Posted by Customer
    A:
    Clean the crankshaft nose and the seal contact surface on the vibration damper.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Crankshaft Pulley
    Q:
    Why is it important to mark the crankshaft pulley and vibration damper before removal for the 2004 Ford Crown Victoria? Posted by Customer
    A:
    It is important to mark the crankshaft pulley and vibration damper so they can be reassembled in the same relative position, as they are initially balanced as a unit.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Crankshaft Pulley
    Q:
    How do you install the damper on the crankshaft for the 2004 Ford Crown Victoria? Posted by Customer
    A:
    Install the damper on the end of the crankshaft, ensuring the keyway in the damper is aligned with the Woodruff key in the crankshaft nose. If the damper cannot be seated by hand, slip the large washer over the bolt, install the bolt, and tighten it to pull the damper into place. Tighten the bolt to the specified torque.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part F3AZ-6316-A, the Right Choice

To ensure reliability, purchase Ford part # F3AZ-6316-A Harmonic Balancer Pulley. It is sometimes referred to as Mercury Crankshaft Pulley, Mercury Harmonic Balancer. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Mercury Cougar, Grand Marquis models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford F3AZ6316A Harmonic Balancer Pulley. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Mercury parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly