Make sure this part fits

Mercury 9L8Z-8501-C Pump Assembly - Water

2009-2011 Mercury 9L8Z8501C

Customer Questions & Expert Answers (6)
Ford 9L8Z-8501-C Pump Assembly - Water
  • Part Description
    Pump Assy - Water
  • Base No.
    8501B
  • Replaces
    9L8Z-8501-B
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mercury
    Base No.8501B
    Manufacturer Part Number9L8Z-8501-C, 9L8Z8501C
    Part DescriptionPump Assy - Water
    Other NamesWater Pump Assembly, Water Pump Housing
    Item Dimensions8.8 x 12.1 x 15.2 inches
    Item Weight7.90 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces9L8Z-8501-B
    ManufacturerFord
    SKU9L8Z-8501-C
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009-2011 Mercury Mariner6 Cyl 3.0L OHC Duratec4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
    2010-2011 Mercury Milan6 Cyl 3.0L OHC Duratec5-Speed Automatic Transmission Mazda FNR5, 5-Speed Manual Transmission (G5M), 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Manual Transmission Mazda G6M, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
  • Customer Questions & Expert Answers

    Q:
    I would like to know is this part gonna fit with my car Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 9L8Z-8501-C fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How should the water pump bolts be tightened during installation for the 2011 Ford Fusion? Posted by Customer
    A:
    Install the water pump bolts and tighten them, and on 3.0L V6 engines, use special tools to reinstall the water pump pulley to the camshaft.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What sound may indicate a failure in the water pump shaft bearings for the 2005 Mercury Mariner? Posted by Customer
    A:
    A howling sound near the water pump while it's running.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    How should you proceed after removing the water pump from the housing for the 2008 Mercury Mariner? Posted by Customer
    A:
    After removing the water pump from the housing: Discard the water pump gasket and clean the sealing surfaces of the housing and the pump. Remove all traces of old gasket material. Compare the new pump to the old one to ensure they're identical. Apply a thin film of ATV sealant to hold the new gasket in place during installation.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What can happen if there is a failure in the water pump for the 2002 Ford Escape? Posted by Customer
    A:
    Serious engine damage can occur due to overheating.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    How do you proceed with the final steps of water pump installation for the 2008 Ford Escape? Posted by Customer
    A:
    The final steps of water pump installation are as follows:Install the water pump bolts and tighten them to the specified torque.Complete the rest of the installation in the reverse order of removal.Refill the cooling system and reconnect the battery.After completing the process, the Powertrain Control Module (PCM) must relearn its idle and fuel trim strategy for optimum driveability and performance.Operate the engine to check for leaks.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Water Pump
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 9L8Z-8501-C, the Right Choice

To ensure reliability, purchase Ford part # 9L8Z-8501-C Pump Assembly - Water. It is sometimes referred to as Mercury Water Pump. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Mercury Mariner, Milan models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford 9L8Z8501C Pump Assembly - Water. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Mercury parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly